new member with a gen1 blazer
08-19-2013, 10:38 PM
#124
On The Tree
Thread Starter
iTrader: (1)
Join Date: Apr 2013
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
lol
well we made some progress today. got the abs crap all deleted and bled so i have brakes and no ugly abs crap
got the trans dipstick in that i forgot...... that was a pain. still have to figure out a trans cooling line thats kinking now
guess i am going to have to put the ecu under the hood even though i really dont want to
got the waterpump tapped for the coolant sensor and put back on along with a tensioner finally
ordered my throttle cable and shifter.
figured out that my cheap ebay throttle body is a pain in the *** and the idle air sensor doesnt fit.......... got to fix that and hope thats all
ordered the radiator and fans
feeling a little better about making lsfest but still a long way to go
well we made some progress today. got the abs crap all deleted and bled so i have brakes and no ugly abs crap
got the trans dipstick in that i forgot...... that was a pain. still have to figure out a trans cooling line thats kinking now
guess i am going to have to put the ecu under the hood even though i really dont want to
got the waterpump tapped for the coolant sensor and put back on along with a tensioner finally
ordered my throttle cable and shifter.
figured out that my cheap ebay throttle body is a pain in the *** and the idle air sensor doesnt fit.......... got to fix that and hope thats all
ordered the radiator and fans
feeling a little better about making lsfest but still a long way to go
08-19-2013, 10:38 PM
#125
On The Tree
Thread Starter
iTrader: (1)
Join Date: Apr 2013
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
lol
well we made some progress today. got the abs crap all deleted and bled so i have brakes and no ugly abs crap
got the trans dipstick in that i forgot...... that was a pain. still have to figure out a trans cooling line thats kinking now
guess i am going to have to put the ecu under the hood even though i really dont want to
got the waterpump tapped for the coolant sensor and put back on along with a tensioner finally
ordered my throttle cable and shifter.
figured out that my cheap ebay throttle body is a pain in the *** and the idle air sensor doesnt fit.......... got to fix that and hope thats all
ordered the radiator and fans
feeling a little better about making lsfest but still a long way to go
well we made some progress today. got the abs crap all deleted and bled so i have brakes and no ugly abs crap
got the trans dipstick in that i forgot...... that was a pain. still have to figure out a trans cooling line thats kinking now
guess i am going to have to put the ecu under the hood even though i really dont want to
got the waterpump tapped for the coolant sensor and put back on along with a tensioner finally
ordered my throttle cable and shifter.
figured out that my cheap ebay throttle body is a pain in the *** and the idle air sensor doesnt fit.......... got to fix that and hope thats all
ordered the radiator and fans
feeling a little better about making lsfest but still a long way to go
08-21-2013, 10:31 PM
#126
On The Tree
Thread Starter
iTrader: (1)
Join Date: Apr 2013
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
got the balancer on, throttle body fixed and back on, throttle cable on, shifter and cable hooked up.
slowly making some progress.
for the people using the kwik setup where did you mount the ps reservoir?
also where is the best place to buy a maf and o2 sensors
here are a couple pics of where i am at now
slowly making some progress.
for the people using the kwik setup where did you mount the ps reservoir?
also where is the best place to buy a maf and o2 sensors
here are a couple pics of where i am at now
08-22-2013, 10:19 PM
#129
On The Tree
Thread Starter
iTrader: (1)
Join Date: Apr 2013
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
well my luck continues. got my radiator and fan setup and it looked great until i was checking it out and the lower hole doesnt have a hole in it........
luckily i noticed it before i put it in the truck. got to call them in the morning and see if they can hurry up and get me another one or refund me the money it is gonna take to have this one fixed
luckily i noticed it before i put it in the truck. got to call them in the morning and see if they can hurry up and get me another one or refund me the money it is gonna take to have this one fixed
08-25-2013, 01:16 AM
#133
On The Tree
Thread Starter
iTrader: (1)
Join Date: Apr 2013
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
well i am getting closer. got the battery wired to the back, put power to the fuel pump and it turned on with no leaks, started putting the front clip back together and put the light harness back in.
still looking for a local maf so i dont have to wait on shipping one
here is a pic of where i am as of tonight
still looking for a local maf so i dont have to wait on shipping one
here is a pic of where i am as of tonight
08-25-2013, 09:51 PM
#135
On The Tree
Thread Starter
iTrader: (1)
Join Date: Apr 2013
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
mine feels like it is broke tonight but got alot more done today. i will make lsfest even if it kills me lol
well we got the radiator mounted up today and all of the interior put back in the back of the truck
started replacing the seals around the windows in the doors, holy crap what a pain
here is what we are looking like as of now
well we got the radiator mounted up today and all of the interior put back in the back of the truck
started replacing the seals around the windows in the doors, holy crap what a pain
here is what we are looking like as of now
08-28-2013, 10:55 PM
#136
On The Tree
Thread Starter
iTrader: (1)
Join Date: Apr 2013
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Well we finished my half *** wiring and rest fired the motor and it fired up. Didn't run but a sec before we shut her down cause we still go a lot of crap to button up but it fired. **** yeah
