ls doge magnum swap completed.
#1
Teching In
Thread Starter
ls doge magnum swap completed.
I have heard a lot of people asking if it could be done. Here is mine. Completed for now... always improving. Currently doing a/c.
Last edited by s/clsxmagnum; 08-02-2013 at 04:26 PM.
The following users liked this post:
Michael Brister (05-21-2020)
Trending Topics
#11
looks good! motor mounts look simple enough with a welder and scrap. why did you use the truck fuel rails and how? how was the center cross rail shortened? thanks in advance for any replies as I'm sure your time is valuable.
#12
Teching In
Thread Starter
It is a 2003 grand prix a/c compressor. I will get some pic up in the morning or afternoon.
the fuel rails are not cut or altered. I made some spacers for the taller ls1 style 60# injectors... I will post pic tomorrow. Some day I would like to upgrade the fuel lines to an -10 and do a billet fuel rail... I would use a ls1 or 2 non return rail if I had one but, it is a budget build.
the fuel rails are not cut or altered. I made some spacers for the taller ls1 style 60# injectors... I will post pic tomorrow. Some day I would like to upgrade the fuel lines to an -10 and do a billet fuel rail... I would use a ls1 or 2 non return rail if I had one but, it is a budget build.
#13
Teching In
Thread Starter
dodge magnum ls based swap twin supercharged
#14
Teching In
Join Date: Mar 2002
Location: San Diego,Ca,Usa
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
#17
Any more info on this or any other Chrysler/Dodge LX swaps, have an 2006 Charger Daytona that may have a blown head gasket and am considering a swap if its not a major pia
#19
Teching In
Thread Starter
You need all aftermarket gages. The engine cradle needs trimmed some. everthing else is like any other swap.. hand made motor mounts, trans mount, drive shaft ect.