need a short or angled spark plug boot
need a short or angled spark plug boot so my rear driver spark plug boot is hitting my steering shaft in the blazer that i am building so i am wondering what you guys recommendfor a solution.
the boot come straight into the shaft. not bad enough where it wont turn but bad enough to make me worry that it wont last long.
trying to find my best option for a short plug boot or one that is a 90 degree maybe.
i have stock wires on it now
the boot come straight into the shaft. not bad enough where it wont turn but bad enough to make me worry that it wont last long.
trying to find my best option for a short plug boot or one that is a 90 degree maybe.
i have stock wires on it now
so my rear driver spark plug boot is hitting my steering shaft in the blazer that i am building so i am wondering what you guys recommendfor a solution.
the boot come straight into the shaft. not bad enough where it wont turn but bad enough to make me worry that it wont last long.
trying to find my best option for a short plug boot or one that is a 90 degree maybe.
i have stock wires on it now
the boot come straight into the shaft. not bad enough where it wont turn but bad enough to make me worry that it wont last long.
trying to find my best option for a short plug boot or one that is a 90 degree maybe.
i have stock wires on it now
http://www.summitracing.com/parts/msd-8849
Here is a thread
https://ls1tech.com/forums/conversio...lug-wires.html
and a youtube video
Mine is gonna be real close, I have the taylor wires. It will rub with the protectors I bought, so I guess that one wont have one. What shaft you running? im using the jeep steering shaft, I had to swap the ends on it though, it was gonna rub my header. Little stuff like that keeps coming up for me too. It took forever to get the motor level, not rubbing the headers on the frame/steering shaft and making a trans crossmember. Working on mounting my radiator now, using a rubber napa truck mat to protect it in the core support.
If you wanna run protectors these are nice and reasonably priced
If you wanna run protectors these are nice and reasonably priced
I used some summit cut to fit plug wires for a ford as they had the 45 degree boot so they tuck up real close to the head. I did have to buy the coil end boots separately to make the custom length wires:
I like that. I am thinking about relocating my coils for a cleaner look.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
