66 Chevelle LSA/4L90E Conversion
#161
TECH Fanatic
Thread Starter
The Evapo-rust is great stuff......Anything with rust just throw it in the bucket for a day...........Others on large items have positioned a small Kiddie pool with the solution and a small pump and run the solvent against the metal so it drains back into the pool ......That works great also.......
the fans are Maradyne....
http://www.maradynehp.com/products/jetstreme/
Ken
the fans are Maradyne....
http://www.maradynehp.com/products/jetstreme/
Ken
#162
TECH Fanatic
Thread Starter
I did some digging around on the ZL1 Camaro site and found my engine listed in the Registry.......after digging some more I found some pictures of the car as delivered that were posted by the original owner.............Pretty Neat!!!
#164
TECH Fanatic
Thread Starter
#165
TECH Fanatic
Thread Starter
After getting most of the Engine compartment "Stuff" hooked up.......I got the Intercooler system filled and Bled.....So I decided to install the rest of the sheet metal so I can get the ECM and forward wiring system installed.......Starting to look like a car again...........
#167
TECH Fanatic
Thread Starter
Got all the sheet metal installed and finish bolted in......Got the front Bumper back on and I also got the ECM and Trans Modules installed......Forward Lamp harness is next along the getting the Intercooler pump wired.......Now......I just need to find my Horns......they are here somewhere.......Dammmm!!!
#171
TECH Fanatic
Thread Starter
Ken
#172
TECH Fanatic
Thread Starter
First off......I would like to thank the person who brought my horns back and put them in the garage on the table in plain view........Thanks........
Now.....I got that mess of wires all cleared up in the front of the car.......I hooked up a temporary power feed and checked out the lights.........They actually worked......LOL........I bought an American Autowire Classic update wiring kit and they have anticipated any combination of options and or Gauge/Engine options......I was intimidated by the amount of wires and circuits in the beginning.....but......after looking at what I really needed to hook up....I started removing wires from the bulkhead .......Example.......with the Speartech LS harness, most everything is taken care of in that harness.....blending it into the system is as simple as a fuel pump lead a couple of grounds and keyed ignition power and Battery........That's about it......The Auto engine harness had a bunch of wires in it.....I ended up using 4 wires.....one for the Solenoid and three for the windshield wiper/ Pump assy.......The forward lamp harness was about as simple....about the only major thing I have left to do is tackle the inside.......That's next.....Hopefully the wheels and tires will show up soon also.......
Now.....I got that mess of wires all cleared up in the front of the car.......I hooked up a temporary power feed and checked out the lights.........They actually worked......LOL........I bought an American Autowire Classic update wiring kit and they have anticipated any combination of options and or Gauge/Engine options......I was intimidated by the amount of wires and circuits in the beginning.....but......after looking at what I really needed to hook up....I started removing wires from the bulkhead .......Example.......with the Speartech LS harness, most everything is taken care of in that harness.....blending it into the system is as simple as a fuel pump lead a couple of grounds and keyed ignition power and Battery........That's about it......The Auto engine harness had a bunch of wires in it.....I ended up using 4 wires.....one for the Solenoid and three for the windshield wiper/ Pump assy.......The forward lamp harness was about as simple....about the only major thing I have left to do is tackle the inside.......That's next.....Hopefully the wheels and tires will show up soon also.......
#174
TECH Fanatic
Thread Starter
I got the inlet air tube assy fabricated and fitted to the car .....Just need to weld it up and make the mounting plate for the mass airflow sensor.........Now it time to get started on the inside wiring...........
Ken
Ken
#175
TECH Fanatic
Thread Starter
Been working on the car every day........I am just about finished with the wiring in the Engine compartment......got the fan relay's installed along with the Battery cables, Dakota digital lines for the relays......fuel system wires all installed for the Vaporworx system.......The pressure Module was just finished up and is in transit....I also have all the Vintage Air wires hooked up........I also have the trans cooler lines fit and installed..........This Voltmeter guy stuff never ends.......But.....I did spin the engine over today.......Getting close.......No pictures of progress because everything looks the same......LOL.....Getting close to tackling that pile of wire on the inside of the car......
Merry Christmas to All!!
Merry Christmas to All!!
#177
Looking good Ken. How did you like the stink tubing on the gas tank straps? Didn't encounters any problems during assembly? Pics?
#179
TECH Fanatic
Thread Starter