On 3 Performance LS1 swapped Foxbody Kit / Build
#42
I hope but we have not had a car to test that on yet. Once we have product, I have a few guys that are pretty set on running it. So we should get some fairly quick feedback if all goes as planned
#45
Do you have any pics of the merge from the crossover and the wastegate location in the merge?
Looking forward to getting this kit for my SN95. I think just the coldside will need modifications nothing major though since the engine bay is the same as the Fox
Also I see someone is going to go with a S400 series turbo above. Will the headers hold such a large frame turbo without worrying about cracking???
Looking forward to getting this kit for my SN95. I think just the coldside will need modifications nothing major though since the engine bay is the same as the Fox
Also I see someone is going to go with a S400 series turbo above. Will the headers hold such a large frame turbo without worrying about cracking???
#46
I would most likely add some sort of brace on a turbo with that kind of weight if it were my build.
The photos I have posted is about all I have on here. The gate comes off the merge point on the pass. side header
The photos I have posted is about all I have on here. The gate comes off the merge point on the pass. side header
#47
We have the complete kits in stock now and anyone who pre-ordered will be shipped Today or Monday. Currently working on getting any chevy truck 1500 turbo kit and lsx swapped foxbody kit out the door. We have been taking orders since November so they were piling up and will slowly work through them.
If you have been waiting to order till the kits were ready to ship, now is the time to get in touch with us!
If you have been waiting to order till the kits were ready to ship, now is the time to get in touch with us!
#52
Yes, we called everyone back but had a tough time getting in touch with people. Left messages so if you didnt get the message, call us back or email me your number and we will call. We are open Mon-Fri
Right now we arent selling hot sides, the production was only half what we had expected. So just going to sell complete kits
Right now we arent selling hot sides, the production was only half what we had expected. So just going to sell complete kits
#53
What kind of fuel requirements is needed for your kit? I am currently running the Vette filter/regulator with a fox tank and 255lph pump with stock 98LS1 injectors.
Your kit looks killer in that Fox engine bay!!
Your kit looks killer in that Fox engine bay!!
#54
Thats all directly related to power and fuel used. I dont think you will get far with those injectors but if you order injectors with the kit, you should be able to support at least around 450-500 on a 255 pump. Well under that if your on e85
#55
11 Second Club
iTrader: (39)
Join Date: Jan 2003
Location: NW Chicago Subs
Posts: 3,321
Likes: 0
Received 0 Likes
on
0 Posts
I sent a PM but did not hear back.
Any experience putting any of your kits into 1st gen F-Body? 67-69 Camaro, Firebird, Nova? This kit looks like it may work. I have a 67 Camaro swap I am working on and your kits look good and are a bargain. I would like to see if anything you have would work in my car.
Thanks
Any experience putting any of your kits into 1st gen F-Body? 67-69 Camaro, Firebird, Nova? This kit looks like it may work. I have a 67 Camaro swap I am working on and your kits look good and are a bargain. I would like to see if anything you have would work in my car.
Thanks
#56
Sorry not sure why the pm never was responded but just sent over an email reply. I check email much more frequently throughout the day, anyone looking for a quicker response, email me directly
On3Performance@aol.com
On3Performance@aol.com
#58
Teching In
Join Date: Nov 2013
Location: In front of you
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I just got my kit today .. Everything looks perfect and the quality is outstanding now all I need from you guys is that 78mm . These guys have been awesome to deal with and they are making it cheap and easy to build quick street cars .
#60
TECH Resident
iTrader: (34)
Join Date: Jan 2008
Location: Houston Tx
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
Whats the limit for how much boost you can make with this kit? I was reading another thread that looked like 8psi max maybe?
Last edited by bigfatls6; 03-04-2014 at 01:13 AM.