LSX twin turbo 52Mercury
#23
Staging Lane
Thread Starter
Join Date: Jan 2014
Location: Australia
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Made a water block for the remote pump today
I't is 4 x -12 to 2 x -20 jic fitting and bored like a Y piece internally then welded it all up
![](https://scontent-a.xx.fbcdn.net/hphotos-prn2/1492728_240448826128694_1352430618_o.jpg)
![](https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/1523899_240448856128691_174759098_o.jpg)
![](https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/1504385_240448769462033_521105310_o.jpg)
![](https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-frc3/1492592_240448792795364_1991915103_o.jpg)
Return reg
![](https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn1/1491520_240449126128664_290448771_o.jpg)
![](https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/857223_240449362795307_1259556171_o.jpg)
I't is 4 x -12 to 2 x -20 jic fitting and bored like a Y piece internally then welded it all up
![](https://scontent-a.xx.fbcdn.net/hphotos-prn2/1492728_240448826128694_1352430618_o.jpg)
![](https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/1523899_240448856128691_174759098_o.jpg)
![](https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/1504385_240448769462033_521105310_o.jpg)
![](https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-frc3/1492592_240448792795364_1991915103_o.jpg)
Return reg
![](https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn1/1491520_240449126128664_290448771_o.jpg)
![](https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/857223_240449362795307_1259556171_o.jpg)
![](https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc1/856271_240449522795291_543086828_o.jpg)
#36
Staging Lane
Thread Starter
Join Date: Jan 2014
Location: Australia
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Mine are his Aussie cast ls7 6 bolt heads,67cc chamber,2.2" victory titanium inlets,1.6" inconel exhaust,isky rad 9000 tool room springs(for solid roller), pac molly retainers and Ti collets,T&D 1.7 rockers