PSI harness confusion, quick question.
Thread Starter
Teching In
Joined: Jun 2008
Posts: 46
Likes: 0
From: Mississippi
PSI harness confusion, quick question. What I have: foxbody with 6.0, 2002 Camaro gauge cluster/pcm and a psi harness. Where do the tach and temp wires from the pcm go to with a Camaro gauge cluster??
Thread Starter
Teching In
Joined: Jun 2008
Posts: 46
Likes: 0
From: Mississippi
Yes, bought the harness and plug from psi. The problem is there are two wires from the pcm/harness that say temp, and tach, but no where to hook them up at the cluster because they work with serial data. So, where do these two wires go?
Teching In
Joined: Jan 2006
Posts: 41
Likes: 0
From: Hackettstown, NJ
also go to psiconversion.com and click on the instructions tab at the top of the page. From there click on gauge cluster diagrams. It will bring you to several wiring diagrams for your cluster that you can use to trace your wires.
Trending Topics
Thread Starter
Teching In
Joined: Jun 2008
Posts: 46
Likes: 0
From: Mississippi
I've looked through the instructions with no help of what I was looking for. But can try what you've suggested. At first Psi told me to hook tach and temp to B6 class 2 data. But my gauges don't work so I think that is wrong.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Teching In
Joined: Jan 2006
Posts: 41
Likes: 0
From: Hackettstown, NJ
ok. so you have verified the gauge cluster is working properly prior to installing it in your vehicle? Also you verified the cluster is getting correct power? What is the harness # you purchased? I'll see if I can get more time to research it.
Teching In
Joined: Jan 2006
Posts: 41
Likes: 0
From: Hackettstown, NJ
Found this on the website. If you are trying to hookup water press., oil press., and voltage this data is most easily obtained by tapping into the serial data wire on your OBDII port. Simply connect another wire from the OBDII port and run it to the gauge cluster. Most likely where you were originally told, in B6 class 2 data. Maybe you just misunderstood?
were you able to get this straightened out?
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
