cam phaser for ly6
Thread Starter
TECH Fanatic
Joined: Jun 2014
Posts: 1,533
Likes: 12
cam phaser for ly6 hi, i have a 2010 ly6 that is going in my 83 cutlass im putting in mastmotorsports ss cam and springs for ly6 and want to install the cam phaser limiter but i am having trouble finding right one. comp told me to call dealer with engine #s to get cam actuator part # then call them back but i am unsure what numbers they are talking about all i find are casting #s says right on it 6.0 gen 1v any body have a clue? i am hoping someone has all ready done this and also is there anyone out there who has put a 6l80/90 e in a g body? do u have to cut tunnel? im prob gonna go with 4l80e and harness from psi but would be nice to have a 6 speed also looking for an ls3 intake thanks
To find the phaser type what I and others have done is to pull the water pump and unbolt the 3 bolts for the cam electromagnet up top. In that hole you can see the phaser (just take a photo with the flash on with a camera) and it will have a number stamped on it for what kind it is.
