1999 GT lm7/th350 swap
#25
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks. Im going to the track tomorrow. It ran a 7.43 but with only a 1.68 60ft, this converter should help it move out a little quicker.
Ill try to get some engine shots later today.
Ill try to get some engine shots later today.
#26
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here is that underhood pic. I really want to swap to a super vic and a 4150, i think it would clean it up a lot. ![](http://i886.photobucket.com/albums/ac61/jgh64/0F8EA6F4-6CF2-4A75-AF27-7AE1608FCF75.jpg)
I took it to the track and it ran an 8.11 on motor. I made one nitrous pass and my rev limiter was set wrong so it ran a 7.65. I went to test the rev limiter and had a nitrous backfire, blew the intake boot off and started a little fire. I ended up just putting it back on the trailer.
![](http://i886.photobucket.com/albums/ac61/jgh64/0F8EA6F4-6CF2-4A75-AF27-7AE1608FCF75.jpg)
I took it to the track and it ran an 8.11 on motor. I made one nitrous pass and my rev limiter was set wrong so it ran a 7.65. I went to test the rev limiter and had a nitrous backfire, blew the intake boot off and started a little fire. I ended up just putting it back on the trailer.
#29
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks Kingc8r
I hope so BSmiff i really need to build the rear and do rear suspension. Im on bone stock rear control arms and 28 spline rear. Im also using a tiny fogger nozzle. I think a 4150 plate kit on a 225 would make a huge difference.
I hope so BSmiff i really need to build the rear and do rear suspension. Im on bone stock rear control arms and 28 spline rear. Im also using a tiny fogger nozzle. I think a 4150 plate kit on a 225 would make a huge difference.
#31
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I also built the rear. Chromemoly bracing, 9" ends, narrowed 1.5" on each side. 35 spline mosers with a spool and 4.10s and 5/8 studs. Baseline double adjustable upper and lowers, baseline arb, and competition engineering coilovers.
I cut the floor out so id have plenty of room to work
![Name: image_4.jpg
Views: 368
Size: 159.6 KB](https://ls1tech.com/forums/attachments/conversions-swaps/660148d1501528127-1999-gt-lm7-th350-swap-image_4.jpg)
![Name: image_5.jpg
Views: 360
Size: 97.7 KB](https://ls1tech.com/forums/attachments/conversions-swaps/660149d1501528127-1999-gt-lm7-th350-swap-image_5.jpg)
![Name: image_2.jpg
Views: 398
Size: 64.7 KB](https://ls1tech.com/forums/attachments/conversions-swaps/660150d1501528127-1999-gt-lm7-th350-swap-image_2.jpg)
![Name: image_7.jpg
Views: 354
Size: 149.7 KB](https://ls1tech.com/forums/attachments/conversions-swaps/660151d1501528127-1999-gt-lm7-th350-swap-image_7.jpg)
I also bought some 325s
I cut the floor out so id have plenty of room to work
![Name: image_4.jpg
Views: 368
Size: 159.6 KB](https://ls1tech.com/forums/attachments/conversions-swaps/660148d1501528127-1999-gt-lm7-th350-swap-image_4.jpg)
![Name: image_5.jpg
Views: 360
Size: 97.7 KB](https://ls1tech.com/forums/attachments/conversions-swaps/660149d1501528127-1999-gt-lm7-th350-swap-image_5.jpg)
![Name: image_2.jpg
Views: 398
Size: 64.7 KB](https://ls1tech.com/forums/attachments/conversions-swaps/660150d1501528127-1999-gt-lm7-th350-swap-image_2.jpg)
![Name: image_7.jpg
Views: 354
Size: 149.7 KB](https://ls1tech.com/forums/attachments/conversions-swaps/660151d1501528127-1999-gt-lm7-th350-swap-image_7.jpg)
I also bought some 325s
![Name: image_1.jpg
Views: 372
Size: 113.8 KB](https://ls1tech.com/forums/attachments/conversions-swaps/660152d1501528127-1999-gt-lm7-th350-swap-image_1.jpg)
#38
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Its in need of a tune for sure. It ran 8.11 last year on motor. I took it Friday and only made one pass with the new intake and rear setup and it ran a 9.17, cutting out and running really lean.
#40