Steven32

Driveshaft has been ordered. That should be in sometime next week.

Steven32

Hood pins are finished. I think they look great!

trey04gto

iTrader: (4)

Working on a similar Notchback. Never seen that style of pins before and they look killer!! Care to share where you nabbed those or what Company, etc?

Steven32

Thanks!
I got them on eBay. Just search for flush hood pins and they will come up. I think they were like 20-30 bucks.

Steven32

New battery came in. Getting it put in the battery relocation box in the trunk.
Just ordered a battery kill switch and terminals to go outside the car on the back side.

jaywill

iTrader: (5)

Steven32

Oil cooler is mounted. Inside the front driver side fender. We're still working on finding a place to put the trans cooler.

93hatch

iTrader: (9)

I ended up Scrapping my downpipe from the on3 kit and having a new one made. Thing was just going to destroy plug wires

Steven32

I think we should be ok with this one. The headers are heat wrapped, plugs are wires have heat shield sleeves, and the downpipe will be ceramic coated and heat wrapped too.

Steven32

Oil cooler line are all hooked up.



Getting the downpipe worked out. This is definitely a tight fit. Had to make a few adjustments to get it all test fitted. We had to have an ear cut off the trans too. Should work fine though.

1999Black_Z28

iTrader: (1)

I've been looking at Speedhut recently and have a question on yours...Are those OBD2 gauges or are you installing senders for them?

Steven32

We're puttin senders on them.
I was really impressed with the quality when they came in.

Steven32

They also all came with their own sensors.

Steven32

Turbo housing and downpipe are getting ceramic coated.






Trans cooler is getting fitted and put into place.




Battery kill switch and terminal posts are going in here behind the plate. I ordered a hinged plate bracket and will have it on a spacer so that it's hidden and can easily be accessed.

Steven32

Steven32

Downpipe finished with the ceramic coating. I'll have the rest of the exhaust setup fabbed later.




Battery kill switch all mounted up and the terminal posts mounted. Looks really good.

Steven32

Downpipe is heat wrapped too.

Steven32

Downpipe is looking good. Need to get 90 degree boots though.



Driveshaft is in! Perfect fit too. Going to order a safety loop for it.

Grouchy

Jealous of how quickly you're moving through this. lol. Nice progress!

Steven32

Thanks! I was hoping it would be running by now, but there is so much going on with the car it's taking a little longer than we thought. But we can see the light at the end of the tunnel now!