87 Fox Body LS Turbo
#341
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
#343
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
#348
Launching!
iTrader: (1)
Join Date: Mar 2013
Location: Scottsbluff, NE
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Dang youre going to be going down the track before me! I was supposed to drop my car off at the tuner tomorrow but now my converter is making a knocking noise
excited to see yours going!!!
excited to see yours going!!!
#349
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
We'll see...I now have to figure out how the wiring is going to get done. The tuner was going to finish it, but now they're like 2 months back up...
#351
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
They could still get me in relatively soon to do the dyno and tune, but they would need everything else done first. I need the car wiring done...so that's my pickle now. Before they were going to do it, but since those plans were made they got slammed.
#353
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
I have a stock truck harness and ECU. The harness needs to be modified, ecu mounted, all gauges wired up to ecu. Radiator fan and trans cooler fan wired to ecu. Transmission wired in. Fuel pump relays installed and wired to ecu. Modify injector clips to work with harness.
I think that's about it. lol
I think that's about it. lol
#356
Why don't you go to LT1swap.com. They give you step by step instructions with pictures of how to convert your harness into a stand alone harness. I did mine in just a few days and that was going slow taking my time. There is a bunch of information on that site.
#357
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for that!
#359
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
#360
TECH Regular
Thread Starter
Join Date: Aug 2014
Location: Texas
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
After looking at LT1's site and seeing what they offer, I'm going to have them modify my harness and ECU.
For what they'll do it for, and everything they'll do, I think it's worth the fee.
For what they'll do it for, and everything they'll do, I think it's worth the fee.