lsa blower swap?
#241
Launching!
iTrader: (13)
Join Date: Jun 2005
Location: absecon,new jersey
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Ok I've read this over and over but not seeing if the lsa blower Is put on a c5 ls1 with the factory c5 brackets and pulleys will it line up to be able to run the alt, p/s waterpump and crank pulley.
Last edited by nitrovette; 08-03-2017 at 06:37 PM.
#242
Teching In
No, the LSA blower pulley is out further than the corvette pulley. all the LSA engines use Corvette spacing for the main accessory's. so the LSA 8 rib pully sits further out than the 6 rib belt. so to answer your question, No you can not run the LSA with one belt on Corvette spacing
#244
TECH Enthusiast
iTrader: (8)
I finished mine a couple weeks ago.
Attachment 518075
Attachment 518074
Attachment 518073
LS2 block .05 over
mahle -5 pistons
Eagle H beam rods
WCCH stage 2 LSA heads
CHE rockers
Custom comp cam
Hooker exhaust manifolds
2.5 mandrel stainless exhaust side dumped
Oem blower pulleys (for now)
ZL1 intercooler pump
Alan Grove low mount AC
Aeromotive a1000 pump (in tank)
Made 550/520 on a "heartbreaker" mainline dyno
So far she runs great.
Attachment 518075
Attachment 518074
Attachment 518073
LS2 block .05 over
mahle -5 pistons
Eagle H beam rods
WCCH stage 2 LSA heads
CHE rockers
Custom comp cam
Hooker exhaust manifolds
2.5 mandrel stainless exhaust side dumped
Oem blower pulleys (for now)
ZL1 intercooler pump
Alan Grove low mount AC
Aeromotive a1000 pump (in tank)
Made 550/520 on a "heartbreaker" mainline dyno
So far she runs great.
What throttle body is that?
#245
If you need more clearance for steering, etc you can get a different GMPP LSA FEAD they call the "LSA Modified Accessory Drive" that uses a corvette high mount Alt. I know Pace has it on their site.
Attachment 604094
Attachment 604094
Im currently trying to mount the same power steering reservoir. how did you end up mounting yours? looks amazing id like to try and mount mine similar on my nova.
#246
TECH Senior Member
#248
TECH Enthusiast
iTrader: (5)
I ended up using the "modified" Vette accessory configuration. I already had the Vette front drive, plus the alternator on the LSA front drive would interfere with my steering box. I wasn't fond of how GM shows to mount the steering reservoir. So I made a bracket on the drivers inner fender well with my fuse box mount to attach to.
#249
#250
Looking or the stock intercooler pump bracket. If anyone has one for sale please email me.
Thanks
Doug
thedugan789@yahoo.com
Update found a bracket on Ebay thanks all
Thanks
Doug
thedugan789@yahoo.com
Update found a bracket on Ebay thanks all
Last edited by ChicoRules; 05-27-2021 at 06:23 AM. Reason: found one
#251
TECH Fanatic
iTrader: (27)
Personally I'd go with a different pump. After searching around I found a Pierburg CWA50 off of an X5 BMW that came with wiring and a bracket for about $65 bucks. It performs on par with the Varimax pump that all the ZL1 guys upgrade to.
#252
Can anyone answer a question for me?
What is different about a “modified” Corvette FEAD vs a regular Vette FEAD when using a LSA sc?
I have a new vette FEAD AND CONCIDERING doing a LSA and I refuse to buy a new FEAD. THATS a deal breaker for me.
thanks,
jim
What is different about a “modified” Corvette FEAD vs a regular Vette FEAD when using a LSA sc?
I have a new vette FEAD AND CONCIDERING doing a LSA and I refuse to buy a new FEAD. THATS a deal breaker for me.
thanks,
jim
#253
TECH Fanatic
iTrader: (27)
Hey Jim, from what I understand it has something to do with the water pump. The Vette and LSA main accessories are on the same spacing, but the CTS-V has some additional bosses in the water pump for the tensioner brackets for the 8 rib supercharger setup. Check out my build earlier on and you can see what I mean. Your PS and Alt will work just the same.
#254
Thanks Ryeguy2006. I thought they just did submit different for the P/S res. I’ll have to reread your thread.
#255
I wouldn't modify my FEAD, get the Olson Kustom Works mod to the LSA and use your factory drive.
https://olson-kustom-works.myshopify...ollections/all
That's what I've done, anyway....
https://olson-kustom-works.myshopify...ollections/all
That's what I've done, anyway....
#256
I have the GMPP Vette FEAD but I did buy the LSA WP and supercharger parts(brackets and pulley’s ). Just the pulleys and brackets were over $600. The Modified LSA FEAD is about $1200. I’m just glad when I got my FEAD it was around 500
either way, the entire FEAD setup is expensive once you ad in the supercharger parts. Holley FEAD parts seems to bridge the gap between OEM quality and appearance that many people want. HOLLEY needs to expand the FEAD lineup to include LSA supercharger swaps.
either way, the entire FEAD setup is expensive once you ad in the supercharger parts. Holley FEAD parts seems to bridge the gap between OEM quality and appearance that many people want. HOLLEY needs to expand the FEAD lineup to include LSA supercharger swaps.
Last edited by Jimbo1367; 12-25-2021 at 12:16 PM.