What aftermarket radiator are you using?
Thread Starter
Teching In
Joined: Sep 2007
Posts: 20
Likes: 0
What aftermarket radiator are you using? I have to order a radiator for my 55, I am going with an over sized cross flow that will need to have some good puller fans. I have a good size intercooler in front of it so I want something that will do the job. Turbo 6.0 Thanks
I use the Fluidyne that is the direct replacement for the FD RX7 and use the stock twin puller fans and a air seperator tank on a N/A LS1. It's kept it's cool for over 8 years.
My existing radiator is about do for replacement. I'm going to try one of these next.
http://www.eastwood.com/triflow
Not many size options though.
http://www.eastwood.com/triflow
Not many size options though.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Staging Lane
Joined: Jun 2013
Posts: 83
Likes: 1
My existing radiator is about do for replacement. I'm going to try one of these next.
http://www.eastwood.com/triflow
Not many size options though.
http://www.eastwood.com/triflow
Not many size options though.
Thread Starter
Teching In
Joined: Sep 2007
Posts: 20
Likes: 0
I have seen these also and they look like a great idea, It has mixed results when you start to ask about it on the internet. I hate to feel like the guinea pig and it not work out. I am having it custom mounted due to not being able to use the stock core support, so it would be a real pain to have to replace it if it doesn't perform well.
TECH Fanatic
Joined: Jun 2014
Posts: 1,533
Likes: 12
Don't make the mistake I did and cheap out on the fans. If you are running Ac u will need 4000 cfm. I love my champion rad but the fans that came with it are not strong enough . So I found some slightly used derale H.O fans on ebay. If I had to do it over again , I would've bought my rad without fans and bought the derale set up new.
