Which QuickTime bellhousing?
Thread Starter
Teching In
Joined: Apr 2015
Posts: 35
Likes: 1
Which QuickTime bellhousing? If someone can help, this is probably a stupid question but I'm still learning and I do not want to purchase the wrong part so any help would be appreciated.
I'm mating a LQ4 to a T56 magnum and was wondering which QuickTime bellhousing to use. Would it be the
RM-8020 or the RM-8020PB. Not sure if it matter or not but I will be using the tilt on hydraulic release bearing and a monster clutch.
Thanks in advance.
I'm mating a LQ4 to a T56 magnum and was wondering which QuickTime bellhousing to use. Would it be the
RM-8020 or the RM-8020PB. Not sure if it matter or not but I will be using the tilt on hydraulic release bearing and a monster clutch.
Thanks in advance.
TECH Enthusiast
Joined: Mar 2013
Posts: 503
Likes: 38
Do you plan to align the housing to the center line of the crank? If so I would advise you to call them. They told me yesterday that you will have to use a face plate off of a t56 and bolt it to the housing to get a circle to index from. As far as the part number goes, when I used their "Bellhousing Selector" http://info.quicktimeinc.com/product...-selector.html
I came up with another part number but after further messing with it I came up with yours. Check out this link http://browellbellhousing.com/. You will be able to index off of their housing and after talking to them I have more faith in their product than Lakewood. I have no experience with them other than my conversation with them yesterday. They may have the same reputation as Quicktime.
I came up with another part number but after further messing with it I came up with yours. Check out this link http://browellbellhousing.com/. You will be able to index off of their housing and after talking to them I have more faith in their product than Lakewood. I have no experience with them other than my conversation with them yesterday. They may have the same reputation as Quicktime.
Do you plan to align the housing to the center line of the crank? If so I would advise you to call them. They told me yesterday that you will have to use a face plate off of a t56 and bolt it to the housing to get a circle to index from. As far as the part number goes, when I used their "Bellhousing Selector" http://info.quicktimeinc.com/product...-selector.html
I came up with another part number but after further messing with it I came up with yours. Check out this link http://browellbellhousing.com/. You will be able to index off of their housing and after talking to them I have more faith in their product than Lakewood. I have no experience with them other than my conversation with them yesterday. They may have the same reputation as Quicktime.
I came up with another part number but after further messing with it I came up with yours. Check out this link http://browellbellhousing.com/. You will be able to index off of their housing and after talking to them I have more faith in their product than Lakewood. I have no experience with them other than my conversation with them yesterday. They may have the same reputation as Quicktime.
Andrew
RM-8020PB is configured for a mechanical clutch actuation. The PB code stands for "pivot ball" which references the pivot point for the clutch fork. If you intend to use a hydraulic clutch, then RM-8020 would be the correct selection.
TECH Enthusiast
Joined: Mar 2013
Posts: 503
Likes: 38
As of yesterday they did. That is when whoever answered the phone said that the one they make for the T56 for the LS engine would have a round hole in the back of the housing that would be centered on the input shaft of the T56 so you could index off of that hole and the crank. What is their reputation?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
