When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I had to make a new account being that i could not log on with my old account markarleta1 , its been a while since i did my conversion and i have a couple questions i hope one of you can help me out with. i have a 1964 malibu ss with a 5.3/4l60 out of a 2003 gmc, want to know what i need to do to convert it to a corvette style intake and pulley system. thanks in advance for any help
The question is "why"? Do you want it for looks, or clearance or? Like said, you can use all stock Corvette stuff and bolt it on, or you can buy the Holley stuff, and you can mix and match. There really are a lot of ways to achieve this.
The question is "why"? Do you want it for looks, or clearance or? Like said, you can use all stock Corvette stuff and bolt it on, or you can buy the Holley stuff, and you can mix and match. There really are a lot of ways to achieve this.
The Holley kit is fantastic and will work with any of the spacing needed. Your alternator will work with it, but you will need to purchase a new power steering pump and reservoir setup. You can also swap out your water pump for an f body pump with spacers or use the newer f body pumps that have the same spacing as the trucks. One thing I would recommend is to find an LS6 intake. The LS1 intakes actually make less power then the truck intake.