i need help!!
Thread Starter
Teching In
Joined: Feb 2016
Posts: 11
Likes: 0
i need help!! alright guys ive searched everywhere and cant seem to find a 01 Silverado inside cab fuse box pinout diagram. Im doing a swap in my s10 and took the complete harness cab and motor with all the fuse boxs and everything including all the way up to the key. I cut the wires going to the radio and ac seeing as I wont be using those but now the cluster wont power on the check engine light comes on and a couple gauges move like theyre gonna turn on but nothing else works. also go to start the truck and it fires up then like 5 secs later dies im assuming the security system is shutting it off but don't get y if I have the key.. so someone please help me and yes I know I should just do the cpw harness but don't have the money for it
You might need to do a security relearn procedure. I found one at the time I did mine, but couldn't remember where. I googled and found this procedure:
Security Relearn
Step 1: Attempt to start vehicle. If it starts up, then no relearn is needed. If it does not start or if it starts and immediately dies, then the relearn procedure is needed.
Step 2: Leave the key in the run position for 10-12 minutes (or until the security light shuts off). Make sure that no accessories are on and that your headlights are switched to the off position.
Step 3: Remove the key from the ignition for 45 seconds.
Step 4: Repeat steps 1-3 three times, ensuring that you attempt to start it on each attempt. On the fourth start attempt, the vehicle should start and the relearn is complete.
Security Relearn
Step 1: Attempt to start vehicle. If it starts up, then no relearn is needed. If it does not start or if it starts and immediately dies, then the relearn procedure is needed.
Step 2: Leave the key in the run position for 10-12 minutes (or until the security light shuts off). Make sure that no accessories are on and that your headlights are switched to the off position.
Step 3: Remove the key from the ignition for 45 seconds.
Step 4: Repeat steps 1-3 three times, ensuring that you attempt to start it on each attempt. On the fourth start attempt, the vehicle should start and the relearn is complete.
Last edited by robm-951; Feb 16, 2016 at 04:03 PM.
Thread Starter
Teching In
Joined: Feb 2016
Posts: 11
Likes: 0
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo