bgregory

I am in the early stages on an LS swap on our 61 Cadillac and am wanting to see if anyone on here has done the same. Wanting to see what motor mounts were used for the swap if possible. Thanks!

Advanced Design

I would be interested in what has been used too.

Bgregory, I almost bought this one in 2014 to swap and figured I would build my own mounts.

Nav1224

gofastwclass

iTrader: (2)

Judging that the thread was started in 2016 by a guy with one post who only logged in one day and had a grand total of two comments... I'd say this one was dead until you revived it.



bgregory's activity.



The good news is you proved the search function still works after all these years.

Several people have mentioned doing what you wish to do but I have yet to see anyone actually finish one and document the process.
If you have decent fabrication skills, this won't be a difficult swap.

If you don't have good fabrication skills I would personally like to take this moment and welcome you to the beginning of your journey down Struggle Street. This journey can be as long as you wish and often ends at the most famous of destinations known as the land of unfinished and forgotten projects.

Best of luck!

G Atsma

DOA about 2-1/2 years ago....