LS2 into my Z32 yehoo
#22
LS1Tech Premium Sponsor
iTrader: (40)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I like where this is going. I loved the z32 I had, except for the underwhelming performance in the acceleration department (2+2 NA car). Should be a well rounded combo with LS power
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
![](https://ls1tech.com/forums/signaturepics/sigpic136487_1.gif)
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
![](https://ls1tech.com/forums/signaturepics/sigpic136487_1.gif)
Find a Quality alignment shop near you!
#23
Teching In
Thread Starter
Join Date: Aug 2016
Location: Memphis, TN
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks! I could see an N/A limmo being a bit sluggish, haha
I'm quite excited. Hoping to get it in and do a test fire by sunday. Fingers crossed.
![The Patriot !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_patriot.gif)
#25
Teching In
Thread Starter
Join Date: Aug 2016
Location: Memphis, TN
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Got the engine primed tonight and wiring harness routes through the firewall.
I used a harbor freight drill pump and it lasted through 4 quarts of oil until it failed, however in was getting good flow to the top end.
I used a harbor freight drill pump and it lasted through 4 quarts of oil until it failed, however in was getting good flow to the top end.
#28
Teching In
Thread Starter
Join Date: Aug 2016
Location: Memphis, TN
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'll be using the LOJ accessory adapter kit to utilize my 300zx Alternator and PS pump in their stock location on the passenger side of the engine. In the spring I will be adding A/C as well.
#31
LS1Tech Premium Sponsor
iTrader: (40)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
this is progressing rather quickly. Looks great!
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
![](https://ls1tech.com/forums/signaturepics/sigpic136487_1.gif)
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
![](https://ls1tech.com/forums/signaturepics/sigpic136487_1.gif)
Find a Quality alignment shop near you!
#32
Teching In
Thread Starter
Join Date: Aug 2016
Location: Memphis, TN
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
#35
Teching In
Thread Starter
Join Date: Aug 2016
Location: Memphis, TN
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Taking the headers to have bung welded in early sat morning. Hopefully if all goes as planned I should do the first test fire Saturday evening. (knocks on wood)
#38
Teching In
Thread Starter
Join Date: Aug 2016
Location: Memphis, TN
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
#39
Teching In
Thread Starter
Join Date: Aug 2016
Location: Memphis, TN
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
His a short clip taken from my snapchat.
Connected the headers to my existing 2.5" exhaust/H-pipe
<iframe width="560" height="315" src=" " frameborder="0" allowfullscreen></iframe>
Connected the headers to my existing 2.5" exhaust/H-pipe
<iframe width="560" height="315" src="