Disabling VATS
06-23-2004, 04:06 PM
#1
Staging Lane
Thread Starter
Join Date: Jun 2004
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Disabling VATS I'm putting an LS1/LS6 (LS1 engine with LS6 valley, Cam, springs, intake) into a Miata and was wondering if there was an effective way of killing vats.
I have an ECU from a 2000 Camaro (no key to measure resistance of). I also don't really want to purchase LS1Edit at this point. Wife is overwhelmed with costs enough without adding insult to injury.
http://www.sammichael.net/ftp/engine1.jpg
Also is anyone aware of wiring diagrams for this PCM/CAR?
Any help would be much appreciated.
Sam.
I have an ECU from a 2000 Camaro (no key to measure resistance of). I also don't really want to purchase LS1Edit at this point. Wife is overwhelmed with costs enough without adding insult to injury.
http://www.sammichael.net/ftp/engine1.jpg
Also is anyone aware of wiring diagrams for this PCM/CAR?
Any help would be much appreciated.
Sam.
06-23-2004, 06:41 PM
#2
Launching!
iTrader: (18)
Join Date: Mar 2004
Location: Paris, Tx.
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
I went to ebay and found a place called baker electronics selling Vats disable boxes. Easy to hook up, and only cost about $30.
Search for a guy named Magnus on this forum, he has alot of helpful wiring tables on his site, for the LS1, I dont know about the Miata wiring.
Good luck with the swap.
Search for a guy named Magnus on this forum, he has alot of helpful wiring tables on his site, for the LS1, I dont know about the Miata wiring.
Good luck with the swap.
06-23-2004, 10:00 PM
#3
Staging Lane
Thread Starter
Join Date: Jun 2004
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by StngKlr
I went to ebay and found a place called baker electronics selling Vats disable boxes. Easy to hook up, and only cost about $30.
Search for a guy named Magnus on this forum, he has alot of helpful wiring tables on his site, for the LS1, I dont know about the Miata wiring.
Good luck with the swap.
Search for a guy named Magnus on this forum, he has alot of helpful wiring tables on his site, for the LS1, I dont know about the Miata wiring.
Good luck with the swap.
Thanks! Just ordered one. Really appreciate it!
Sam.
