Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

Putting an LQ4 in a Slowpar...

Thread Tools
 
Search this Thread
 
Old 07-29-2017 | 09:05 AM
  #1  
lsdart's Avatar
Thread Starter
Teching In
 
Joined: Aug 2013
Posts: 40
Likes: 1
Default Putting an LQ4 in a Slowpar...

...particularly a 69 Dart. Have an aftermarket front end for it. Have been talking to Denny, the builder of it about a problem. The rear sump pan. Part of Dennys front end is a cross brace that is a necessary evil. Needless to say the sump will be in the way. Denny will be fabbing up a set of LS mounts, he has a ton of inquiries about swapping an LS into Slowpars. He has told me that he is going to attempt to design another brace to get around the pan but...

Did a search on here about a center sump pan. Found 1 thread, not much info it...and it was 7 years old. Any ideas?

After posting this I read the first page of the oil pan sticky and found the link to the Sikky pan...if nothing else is available I will use that...

Last edited by lsdart; 07-29-2017 at 09:35 AM.
Old 07-29-2017 | 08:44 PM
  #2  
JayinMI's Avatar
TECH Apprentice
 
Joined: Jul 2016
Posts: 349
Likes: 19
Default

Go over to Fabo (For A-Bodies Only). There's like 3 people doing LS Swaps into A bodies, and they may have more info...

Jay
Old 07-29-2017 | 11:48 PM
  #3  
Project GatTagO's Avatar
TECH Senior Member
20 Year Member
iTrader: (7)
 
Joined: Mar 2003
Posts: 10,222
Likes: 1,511
From: The City of Fountains
Default

If you need a stock front sump pan, the 2004-2006 GTOs used a front sump pan.

Andrew



Quick Reply: Putting an LQ4 in a Slowpar...



All times are GMT -5. The time now is 02:27 PM.