Trouble solution at the time of the start
#1
Registered User
Thread Starter
Join Date: Aug 2017
Location: Nagoya,Japan
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Trouble solution at the time of the start
As for me, Swap does LS1 and 4L60E now in Corvette of 1966 in Japan.
Engine and Transmission purchased a new article in Shop called TURNKEY.
All ECU purchases it in same Shop, too.
Non-Sponsor Soliciting Policy
I set Fuel Press in 58Psi as it was appointed.
After Fire produces it only at the time of a start.
Engine is very stable after the start.
However, I extremely rarely give black smoke and make a stall.
I confirmed whether Ground did not have a problem again and drew wiring again.
However, the basic symptom is not improved.
I think that the main body of ECU does not have a problem, but please tell me if there is the remedy with the idea.
Last edited by KCS; 08-08-2017 at 06:35 AM. Reason: Non Sponsor Link Removed