Advice needed on a new setup
Thread Starter
Teching In
Joined: Jun 2017
Posts: 2
Likes: 0
Advice needed on a new setup I am building a ls3 motor that I will be sitting it in a mustang coupe. I am gonna run a carburetor on this setup something which I have never done but I'm looking for advice on what to use as far as powering this thing. I have looked into the msd 6014 box but I really haven't seen a lot on those. If I go that route what all sensors would I need and would I need a factory harness or does everything come with the msd kit? This motor will also have a pretty heavy shot of nitrous in it so another question is does this msd kit work well with that type of application as well?? Any advice or help is greatly appreciated thanks in advance!!
Reading the instruction is a good start:
http://documents.msdperformance.com/6014.pdf
Looks like it has nitrous retard...It needs RPM and MAP...looks like a CTS is optional.
Andrew
http://documents.msdperformance.com/6014.pdf
Looks like it has nitrous retard...It needs RPM and MAP...looks like a CTS is optional.
Andrew
