LS swapping my LS - L92/LS3 into C5
04-15-2018, 09:13 AM
#105
cooler fins look a lot better.
04-25-2018, 06:04 PM
#109
Sure is. It's an original rim from my first "fun" car, 2006 Nissan Sentra SE-R Spec V. I try to keep one memorable part from each car I own as a piece of memorabilia.
05-15-2018, 09:55 AM
#112
TECH Senior Member
iTrader: (7)
I have a ton of old pictures to update showing the last few months of work but still need to sift through them.
In the meantime, this happened last night:
https://www.youtube.com/watch?v=GlFGas9VB_E
In the meantime, this happened last night:
https://www.youtube.com/watch?v=GlFGas9VB_E
Andrew
05-15-2018, 11:04 AM
#114
Gotta love the LS.
06-01-2018, 08:15 AM
#115
Ok, coming up on 400 out of 500 slow break in miles for the rear diff (the old one was making noise and was replaced under warranty).
I "borrowed" a tune from a guy on CorvetteForum with an LS3 C5, surprisingly runs really well around town. With the cutouts closed the car sounds stock and cruises nicely. With the dumps open you can definitely tell it's cammed
Pat G is working on a remote tune for me, expect to get it in the next couple days. That should coincide with the end of the diff break in - I plan on changing the engine oil and diff lube and letting it eat.
So far there have been no unusual noises, sounds, leaks, etc. Only issue is a P0332 code for a knock sensor that keeps coming back. I need to check to see that the harness isn't pinched anywhere, and that the sensors themselves are working. Anyone know how to get a live reading in HPT VCM for knock sensors so I can tap on em and see which one is dead?
I "borrowed" a tune from a guy on CorvetteForum with an LS3 C5, surprisingly runs really well around town. With the cutouts closed the car sounds stock and cruises nicely. With the dumps open you can definitely tell it's cammed
Pat G is working on a remote tune for me, expect to get it in the next couple days. That should coincide with the end of the diff break in - I plan on changing the engine oil and diff lube and letting it eat.
So far there have been no unusual noises, sounds, leaks, etc. Only issue is a P0332 code for a knock sensor that keeps coming back. I need to check to see that the harness isn't pinched anywhere, and that the sensors themselves are working. Anyone know how to get a live reading in HPT VCM for knock sensors so I can tap on em and see which one is dead?
10-08-2018, 11:17 AM
#120
TECH Senior Member
