2007 Silverado Classic V6 to LQ9 Swap
#1
Teching In
Thread Starter
iTrader: (-1)
Join Date: Aug 2007
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
2007 Silverado Classic V6 to LQ9 Swap
Swapping a LQ9 6.0L into a 2007 Silverado Classic single cab SWB pickup , I understand that there are several things that will interchange . I'm not certain exactly what year model the engine is but I know that it was bought w/o ECM and the harness was cut , I haven't had the opportunity to see where it was cut (I'm thinking at the fuse box and ECM plugs still intact ). I guess the first question would be how to Identify the year model of the LQ9 , I have all the numbers off the engine , would it be possible to identify it from those ? What , if anything , off the V6 would carryover to LQ9 ? Accessories ? Frame mounts ? A/C hoses ? I know that these are kind of broad , general questions but I want to get a good general idea of the scope of this swap and what will be needed before starting . Thanks Terry
#3
Teching In
Thread Starter
iTrader: (-1)
Join Date: Aug 2007
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Sorry I haven't replied back , been busy with life ! Will be using a 4L60e trans mission , I don't have the motor where I can put eyes on but I'm almost sure that it is a 24x reluctor wheel , as they were only available up until 06 if I'm not mistaken .