Gen III PCM Run Gen IV Gauges
11-06-2021 | 02:23 PM
#2
Joined: Mar 2010
Posts: 405
Likes: 32
From: Vancouver area, West coast Canada
Short answer : Nope. Completely different data protocols. Class2 Vs CAN .
Long answer : It is possible to make a device to translate from one to the other, Guys on this forum have done it (eg :GM to Jeep). But I'm not aware of any commercial off the shelf products that can do it.
Long answer : It is possible to make a device to translate from one to the other, Guys on this forum have done it (eg :GM to Jeep). But I'm not aware of any commercial off the shelf products that can do it.
11-07-2021 | 02:43 PM
#3
Thread Starter
On The Tree
Joined: Apr 2011
Posts: 129
Likes: 0
From: Vancouver, WA
Short answer : Nope. Completely different data protocols. Class2 Vs CAN .
Long answer : It is possible to make a device to translate from one to the other, Guys on this forum have done it (eg :GM to Jeep). But I'm not aware of any commercial off the shelf products that can do it.
Long answer : It is possible to make a device to translate from one to the other, Guys on this forum have done it (eg :GM to Jeep). But I'm not aware of any commercial off the shelf products that can do it.