Dlb21964

I’ve just hooked up my aftermarket Entropy radiator and custom coolant/surge tank and want to see if how I’ve configured it looks ok.

I went by the diagram below, with a bit of a twist by tee’ing my one hose off the recovery tank into my heater hose. I’m using a Vintage Air AC kit along with a crossover tube between my heater hoses.

I let the engine idle today, and it heated up to 190, first fan came on and temps came down to 180 or so. Stayed right around 180-185. It doesn’t seem to be overheating.Heater is working. I have a 18lb cap on the radiator and a 0 pressure cap on the recovery tank.

Does this look correct?