Working on swapping a 2001 silverado 5.3 into an old square body. Unfortunately, the 4L60E park neutral switch connectors were hacked off. I have the wiring diagram, which shows the wires and colors but I don't have a picture showing which of the connector pins is which. The PN switch I bought has the connectors with a short pigtail on it, but the wire colors don't match the factory wiring diagram.

I am looking for which pin is which on the connector so I can match it up with the wiring diagram. Does anyone have a picture showing the 7 pin and 4 pin connectors that go into the PN switch?

 

You don't need it, use the one on the Square Body that's on the Steering Column. Wire to that and get rid of the extra wires.

 

Yes, I know about square body wiring, but am wanting to hook up the A, B, C, P wires for the PCM. Just need to know which pin is called what on the connector side.

 

You don't need that switch, at all. I said what I said for a reason.

 

See attached document, is this what you're looking for.

 

Yes, Thank you!