Not LS1 conversion, still need some "Holden" help
#1
On The Tree
Thread Starter
![Question](https://ls1tech.com/forums/images/icons/icon5.gif)
My Question is something I hope someone can help me with some Holden information. I read a couple years back they offered the SC3800 V6 in a rear drive car. My question is in regards to the supercharger/throttle body/ and intake/air cleaner setup. Did they swing the TB around to the front with an elbow or is it still on the back side of the charger? If they made an elbow, what's the part #? Also I need a Harness made up for it, this will be hooked to a T-5. That was the easy part using a 3.1 bellhousing and tranny(with some internal upgrades of course). If you haven't noticed by my username this is being installed in a Dodge Omni 024( Shelby Charger) for those of you who are trying to picture what an 024 looks like. I could really use some help on this. If GM makes the elbow it would save me the time of making it myself. BTW, anyone have a guess on what this could do in a 2500lb.(approx.) car? Thanks Brad Zeidler
![Icon Confused](https://ls1tech.com/forums/images/smilies2/icon_confused.gif)