dennyd

iTrader: (2)

What about the part number for the c5 power steering high pressure hose?

Widetracker

Does anybody have an idea of how much all these parts list for- the grand total for the c5 kit? I'm not really interested in the price on the ac stuff, but someone else may.

Thanks

kukri

iTrader: (9)

Is main bracket what I need for this idler pulley mount? 12561584

chrisp3

i just went through this myself. I will post the prices i got off of gmpartsdirect. I hope you have "MS Word" in order to read it. I took these prices to the local gm dealer and they matched them and had it all in stock..(shocker!)
I switched from the low alternator, camaro, to the high mount vette setup. I did this because .... I mounted my engine as far back as i could with the S&P type mounts and I will be using the BRP front rack kit hence, the alternator would hit the rack if it were low mounted.
BTW, the vette alt can be had online for $120 through Advance Auto Parts. And the vette power steering pump (if you need it) is $80 at Autozone. Both have a lifetime warranty. The camaro power steering pump is a different pump than the vette, a thicker shaft diameter if i remember correctly.

And the guy that said his power steering pump pulley was touching the foward boss of the top a arm is/was correct. I also had this problem...for alittle while...
If the motor is mounted with the BRP mounts there is no issue as the pulley is now forward of the a arm boss. But with the S&P mounts the pulley is in line with the a arm and a little torque is sure to shread your belt against the a arm.
You could either grind down the excess , and I do mean excess, metal on the boss that interfears, or do what i did and slap on a set of tubular a arms.

ChrisP

Project GatTagO

iTrader: (7)

Thanks for the tip on the Vette alternator from Advanced!

Andrew

HYTECHF85

Has any one reused the alternator and powersteering pump off of a truck and repositioned then to the f-body configuration?????

cpd004

iTrader: (13)

Does anyone have a diagram like the one kukri posted above that shows the f-body drive accesories?

Jhankinson

iTrader: (1)

P/S reservoir hose (1) 26046910 has changed

NEW Part # is

P/S reservoir hose (1) 159077878

69MyWay

iTrader: (2)

Anybody know what all difference there is in LS1 and LS2 Vette accessories?

I mocked my 85 Vette using a C5 motor. I switched to a crate LS2 and am now probing out the accessory systems.

One thing I know, the a/c compressor on the C6 LS2 has a SIDE port for the maifold in the rear. The C5 LS1 is a rear port. To reuse OEM accessories in a 84-96 Vette, you have to use a REAR port a/c compressor.

With that said, I don't yet know if the compressor mounting bracket is different too.

If I find this out before answering, I'll edit the post with the info. Otherwise, PLEASE chime in if you know.

a10beav

Here is my parts list for LS2 GTO accessories. The F-body LS1 alternator brackets are listed because the GTO alternator is stupid expensive.

Edit: The prices are with a 25% discount, you might be able to get the same from your dealer if they know you'll be buying several parts.

Part -GM # -GM Cost
Fuel rail O-ring kit -89017587 -$28.95
Fuel Rail -12572174
Fuel Injectors(8) -89017586
Fuel Injector Retainer (8) -24503227 -$13.04
MAF -25318411
Starter -92169668 -$280.22
Water Pump -89018034 -$236.33
Power Steering Pump -92161580 -$259.74
Power Steering Reservoir -92176477 -$47.09
Power Steering Bracket -92066673 -$26.60
Power Steering Bkt Bolt -92138830 -$5.76
Power Steering Pulley -92066499 -$45.02
AC Compressor -92175482 -$451.61
Compressor Bracket -92066950 -$48.89
Compressor Bkt Bolts(6) -11515771 -$19.14
Compressor Bkt Bolts(2) -92138526 -$22.70
AC Lower Belt Tensioner -12560345 -$59.83
AC Belt -4K430
Drive Belt -6K785
Pulley, Top Idler -12557335 -$31.73
Drive Belt Tensioner -92111701 -$37.64
Drive Belt Tensioner Bolt -92138257 -$8.50
Drive Belt Idler Pulley -12563326 -$36.68
MAP -16212460 -$62.50
FAST Intake gaskets -30-54009-8 -$31.40 (from FAST)
FAST throttle body gasket -30-54011 -$9.27 (from FAST)
Fuel Rail Cover, right -92066954
Fuel Rail Cover, left -92066955
LS1 F-body Oil Pan set -12558762 -$199.79
Oil Pan pick-up tube -12558251 -$33.91
Oil Dipstick -12551581 -$9.99
Dipstick Tube -12551577 -$7.04
Oil Deflector -12558253 -$17.83
LS1 Alternator bracket -12563327 -$15.66
LS1 Alternator bracket -12556915 -$11.53
Upper Rad. Hose -10271554 -$30.48
Lower Rad. Hose -10271555 -$18.41
Steam Tube -12556452 -$10.55

John B

iTrader: (10)

Here are the details for GM Parts new C5 Acessory drive kit:

Corvette C5 Accessory Mount Kit From GM: PN 19155066 (19155067 for LS2/7) ~$675 Dealer Cost
12572188 Serp Belt
12569528 A/C Belt
12568181 Tensioner
12560345 A/C Tensioner
12557334 A/C Idler
1137031 A/C Compressor
12556444 A/C Compressor Bracket
15261472 P/S Pump (Reman)
12555222 P/S Bracket
12578068 Alt + P/S Pump Bracket
12555693 P/S Pump Brace
12559890 P/S Pump Pulley
10353440 Alternator
26046502 P/S Reservoir

shifty`

iTrader: (3)

n00b request here: it looks like there are a couple of kits listed here. can anyone append pictures of each setup for future reference? i think it would be generally helpful and cut down on questions from others.

meanwhile - John - since you're looking, i'd like to take a sec to say 'thanks' for keeping your personal 'swap progress' website online, it helped me a LOT throughout my swap.

a10beav

If someone works at a dealership parts store they could post the diagrams. Anybody?

DCx

iTrader: (12)

can you guys post up more f body part numbers.

Zedzag

iTrader: (7)

That bracket in your pic is 12563327 alternator main or front bracket.

josht

iTrader: (2)

CTS-V
12598152 Engine Oil Pan/Reinforcement $131.33 S&H $28.89 Total $160.22
12584737 Stick $7.48 S&H $2.00 Total $9.13
12584738 Tube $9.07 S&H $1.65 Total $11.07
12577906 Screen $44.67 S&H $9.83 Total $54.50
12611129 Deflector $15.30 S&H $3.37 Total $18.67
Subtotal: $253.59

part numbers and prices have been verified on gmpartsdirect as of September 2007.

thank you to everyone who helped me get all the part numbers.

Ackattack1

iTrader: (7)

I guess I got a good deal on my engine 5.3L with nearly complete corvette drive system and all accessories....$500

Anyways...I need to get a new crank pulley bolt (with the above combo) what is the part number I should get....I think there are 2 lengths.

DCx

iTrader: (12)

get the arp bolt and be done with it.

pjtimmer

Wil this kit also work with the new LS3 + hotcam crate engine?

and can I just leave out the AC stuff when installing it?

Thanks

Peter

johndeerrm

What parts would i need for this setup? I belive they are F-body parts.