pics of my ls1 240z swap
#1
pics of my ls1 240z swap
here is some pics of my 73 datsun 240z with a 2000 ls1/4l60e combo in it. i also back halfed the car and put a disk brake 9" rear end in it out of a 76 lincon continental. had to narrow it over 11 inches. its 4 linked, with hal QA1 coilovers and the gas tank is from a 2002 trans am. i have done every single thing on this car myself so far, even narrow the rear end. i also had never back halfed a car before this either. just did alot of research and asked alot of questions. let me know what you think. it will look alot better i think with the 13" meats out back.
my goal is to have about 2 or 3 feet of air under the front tires when i am done!
my goal is to have about 2 or 3 feet of air under the front tires when i am done!
#2
a few more. this is just work in progress pictures so dont hate on me cause things arent "purddy" yet. i finally got the ends welded back on the rear end a few nights ago. by the way, let me know what you think of my titanium radiator hoses.
#3
Looks like a cool project. I wouldnt worry about haters. Most of the time when someone says a project looks bad, is because they are a checkbook mechanic and have never seen anything in the "in progress " stage.
#7
Originally Posted by Lesrace82
Looks like a cool project. I wouldnt worry about haters. Most of the time when someone says a project looks bad, is because they are a checkbook mechanic and have never seen anything in the "in progress " stage.
Trending Topics
#9
i used to be into street bikes alot and i had a old factoy header from a bike i had that was titanium. figured i use it somewhere on the car and looked at making headers for it out of a couple of them but they were only inch and a half tubes. so i came up with that. you can pick those factory headers up for really cheap on ebay too.