Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

'65 Chevy II

Thread Tools
 
Search this Thread
 
Old 04-04-2005, 01:47 PM
  #1  
Teching In
Thread Starter
iTrader: (1)
 
kdawgmfic's Avatar
 
Join Date: Dec 2004
Location: Born/Raised Texan
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Default '65 Chevy II

Anyone have fitment issues with a TCI front clip. I have a TCI setup and a 5.3/4L60E waiting for me when I get outa the desert. Just wondering if the AC or PS pump are gonna hit the rails. Also, anyone have suggestions for pumping the fuel? I wanna go with an in-tank pump. I figure I can just fab a pump from an F body into my tank. Any suggestions would be appreciated.

thanks,
Kenneth
Old 04-08-2005, 03:14 PM
  #2  
Teching In
Thread Starter
iTrader: (1)
 
kdawgmfic's Avatar
 
Join Date: Dec 2004
Location: Born/Raised Texan
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Default

Any help from anybody?
Old 04-08-2005, 05:09 PM
  #3  
TECH Resident
 
Oscar Will's Avatar
 
Join Date: Oct 2004
Location: Simi VAlley,CA
Posts: 800
Likes: 0
Received 1 Like on 1 Post

Default

I guess no one has done much with the TCI front clips. They look similar to my Fatman '35 Ford frame rails so you will need to watch the clearance at the a/c compressor if you are using the low-mount right side setup. The power steering ,pump should clear OK. In-tank pump is the only way to go, just make sure if you fab it to include sufficient baffling.




All times are GMT -5. The time now is 11:21 AM.