I wanna here 
Its Alive!! Finally
Thread Starter
TECH Veteran
iTrader: (30)
Joined: Jan 2003
Posts: 4,391
Likes: 0
From: Texarkana, Tx
Its Alive!! Finally Well I finally got it to fire up for the first time 
. After not having any spark, and getting fuel to the motor, I traced down the problem to the coil wire I was using to supply 12v to the ignition wire on the harness. It had 12v in the run position, but not when cranking. Also had a blown fuse in the harness fuse block. Fixed those 2 things, and it fired right up. I recorded it on my phone camcorder..not good quality, but I had to try to get it recorded. Just thought I'd share it with you guys.
. After not having any spark, and getting fuel to the motor, I traced down the problem to the coil wire I was using to supply 12v to the ignition wire on the harness. It had 12v in the run position, but not when cranking. Also had a blown fuse in the harness fuse block. Fixed those 2 things, and it fired right up. I recorded it on my phone camcorder..not good quality, but I had to try to get it recorded. Just thought I'd share it with you guys. congrats!!!!! i cant wait to fire mine off. my wife thinks i am a mad man in the shop. i am doing a complete restore / ls1 / t56 swap at the same time. i have a 30x40 shop looking like a grenade went off in a junkyard 
Originally Posted by SatisTraction
congrats!!!!! i cant wait to fire mine off. my wife thinks i am a mad man in the shop. i am doing a complete restore / ls1 / t56 swap at the same time. i have a 30x40 shop looking like a grenade went off in a junkyard
1. how do you check if you have 12v to the coils during cranking?
2. how do you fix the problem if you find that you don't have 12v during cranking?
I'm having the same problem with my swap....engine turns over....just no spark.
2. how do you fix the problem if you find that you don't have 12v during cranking?
I'm having the same problem with my swap....engine turns over....just no spark.
when the grenade went off in my garage the pieces flew into every room of the house. its a good thing im single right now or i'd probably be divorced. so if anyone knows a gal who likes to wrench and doesn't mind a dashboard in the living room or a hood in the kitchen, hook me up. hey 69 ta what part of north texas? if close id like to see it. thanx joel
Trending Topics
Thread Starter
TECH Veteran
iTrader: (30)
Joined: Jan 2003
Posts: 4,391
Likes: 0
From: Texarkana, Tx
93formto98T/A, did that info help you any? joelvette, I'm near Texarkana in DeKalb. But I already sold everything I had for the project to pay some bills down 
so all I have left now is a rolling chassis 
but it'll live to see another day.
so all I have left now is a rolling chassis but it'll live to see another day. LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
