1995vert To Ls1 98 Small Problem?
01-01-2006, 09:47 AM
#1
11 Second Club
Thread Starter
iTrader: (33)
Join Date: Nov 2005
Location: Who Dat Nation!!!!!!
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
1995vert To Ls1 98 Small Problem? OK PROBLEM IS MY TRANSMISSION CROSSMEMBER IS NOT MATCHING UP DO I NEED ONE FROM A LS1 98 T/A OR A CUSTOM ONE MADE MY CAR IS A 95 t/A VERT
01-01-2006, 10:45 AM
#2
On The Tree
iTrader: (1)
Join Date: Sep 2005
Location: Texas
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
I have the same problem. I am using a stock crossmember that is modified to fit a TH350. For mine all I have to do is re-drill the hole used in the adapter plate (it is a B&M kit). For now I have the trans mount bolt out with the crossmember bolted up and the trans just sitting in place. You might try that and see if you can drill another hole once everything is in place. Mine was only 1/4" different from the LT1 location.
01-01-2006, 02:45 PM
#3
On The Tree
iTrader: (5)
Join Date: Jun 2005
Location: birmingham ,al.
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
What tranny are you using? A crossmember from a LS1 car wont work . The floorpan is different . My T56 bolted right right up to a crossmember from an LT1 car .