Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

What A/C parts do I need?

Thread Tools
 
Search this Thread
 
Old 01-05-2006, 01:59 PM
  #1  
Teching In
Thread Starter
 
bigblockquad's Avatar
 
Join Date: Jan 2005
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts

Default What A/C parts do I need?

Baught a 94 RX-7 with an LS6 motor. Car is beautiful but I live in the central valley and car had no A/C when purchased. Right now not having A/C is no biggie but when may hits it'll be a whole different story. Can anyone provide a parts list of what I'll need to add A/C.

BTW the RX-7 already has the in/under dash stuff there. I just need the engine compartment stuff.

TIA
Rich.
Old 01-05-2006, 02:30 PM
  #2  
Staging Lane
 
thinkBIG's Avatar
 
Join Date: Dec 2005
Location: New Jersey
Posts: 92
Likes: 0
Received 0 Likes on 0 Posts
Default

A/C Compressor Mount
4x Bolts (11515771)
2x Bolts (12556677)
Bracket (1137028)

A/C Compressor Drive
A/C Compressor (11098341)
Bolt (12557335)
Idler Pulley (12569529)
Belt (12560345)
Tensioner (26040467)
Old 01-05-2006, 05:37 PM
  #3  
TECH Fanatic
iTrader: (13)
 
Stu Cool's Avatar
 
Join Date: Dec 2004
Location: Olivehurst, CA
Posts: 1,457
Received 1 Like on 1 Post

Default

If the car has F-Body accessories I have a complete setup, minus the condenser, includes compressor, brackets, bolts, idler, tensioner, belt, everything thinkBIG posted plus dryer, hoses, and hardlines. Was planning to put it on EBay, will sell all for $225 plus shipping.

PM me if you are interested.

Pat
Old 01-05-2006, 06:07 PM
  #4  
On The Tree
 
LS1Cobra's Avatar
 
Join Date: Apr 2005
Location: S. Philly
Posts: 192
Likes: 0
Received 0 Likes on 0 Posts
Default

The question should be can you fit the AC stuffs into that car or not. Double check before wasting your money. I am doing an LS1 conversion into a Z and I can't fit the Fbody compressor any where. This might be the reason why the guy who sold you the car didn't put on the AC system. Good luck
Old 01-06-2006, 02:03 AM
  #5  
Teching In
Thread Starter
 
bigblockquad's Avatar
 
Join Date: Jan 2005
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts

Default

It will fit, it'll be tight, but it'll fit. The engine bay is fairly wide just not much room in front of the motor.

Pat, I'll send you a PM.

Later
Rich.




All times are GMT -5. The time now is 09:25 AM.