LS1 Studebaker - Crossmember finished!
02-17-2006, 08:27 PM
#1
LS1 Studebaker - Crossmember finished! Been making some excellent progress on the project this week. Finished a major step last night, the motor and trans are now completely supported on their new mounts. The welding on the crossmember is one of the items I relied on help from a friend on, and we got 'er done. Next major step is finishing the driver side header modification. Hope to finish that tomorrow.
Here's picture of the finished Crossmember, we started with the Competition Engneering kit. Check out the whole process at the link in my signature.
Pat
Here's picture of the finished Crossmember, we started with the Competition Engneering kit. Check out the whole process at the link in my signature.
Pat
02-17-2006, 08:42 PM
#2
Launching!
iTrader: (4)
Join Date: Nov 2005
Location: Las Vegas
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Nice work! Very clean crossmember that looks like it will paint up very well. Pretty cool when the stuff underneath that almost no one will see looks as good as anything on the top side!!
Mike R.
Mike R.
