T56 Shifter Relocation
#21
Well. almost direct bolt in.. Input shaft has to be swapped out for a GM size one, front adapter plate (between trans and bell housing) are different for Ford, Mopar and GM. Else you will have to modify the Throwout Bearing, Which is what I did. Output shaft is larger also.
But the GM Bell housing will bolt up to the Viper front adapter plate.
But the GM Bell housing will bolt up to the Viper front adapter plate.
#23
I think you'd be hard pressed to find a better write up than this, by "TR56" on www.67-72chevytrucks.com:
http://67-72chevytrucks.com/vboard/s...d.php?t=300892
http://67-72chevytrucks.com/vboard/s...d.php?t=300892
#26
I have the Keisler kit that relocates shifter to forward location including Hurst shifter stick to clear bench seat and super boot that I never used in my 57 project.
Later,
BobH
Later,
BobH