Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

Need some help with part #'s

Thread Tools
 
Search this Thread
 
Old 03-09-2006 | 12:10 PM
  #1  
Jhankinson's Avatar
Thread Starter
TECH Apprentice
iTrader: (1)
 
Joined: Oct 2005
Posts: 314
Likes: 0
From: Port Charlotte, FL
Default Need some help with part #'s

I have searched everywhere...and with no luck. I am looking for the bracket that bolts to the rear bolt holes on the trans pan that holds the shifter cable on S10's and Balzers. I have the Fbody one but it wont work with the Blazer center console shift cable. I also need the little shift plate that bolts to the detent rod on the side of the transmission...the one that the shift cable snaps to. If ANYONE can help me thanks so very much....I am in desperate need...and the "stealer"ship just wants to jerk me around.

Thanks!! Josh-
Old 03-09-2006 | 03:56 PM
  #2  
bigredexpress99's Avatar
TECH Resident

iTrader: (15)
 
Joined: Jan 2005
Posts: 932
Likes: 0
From: Omaha, NE
Default

I think this is what your looking for - 15033324 - this is what the cable goes through on the side of the tranny, and that little piece is a - 15717549. Mind you these parts are from a 96 s10 with console shift. The 1991-94 style used rods.
Old 03-10-2006 | 05:50 AM
  #3  
Jhankinson's Avatar
Thread Starter
TECH Apprentice
iTrader: (1)
 
Joined: Oct 2005
Posts: 314
Likes: 0
From: Port Charlotte, FL
Default

awesome that is exactly what i needed. I have a 1994 but it was originally a 5sp...so i dont have any of the auto stuff. I put in a center console out of a blazer with floor shift...so i needed all the parts to make the LS1/4l60e work right. Again thanks alot!

Josh-




All times are GMT -5. The time now is 04:22 AM.