Steve68's Camaro.
just need to clean up, I hoping for the new house and the 40x40 or bigger shop,
I'm going to rearrange the tool boxes, that should give me some space back!
T, you right it's time to get it to roller status with a motor trans d/s and to turn the key!!!
I'm going to rearrange the tool boxes, that should give me some space back!
T, you right it's time to get it to roller status with a motor trans d/s and to turn the key!!!
I'm hoping for a new home in a big shop.
On The Tree
Joined: Oct 2010
Posts: 113
Likes: 0
From: Melbourne, Fla
Steve,
Surf was up?! Well, we spent good time this weekend finishing up the firewall... I'm out of body shop HELL!! Brian married the sub to the body and we are going for mock up this week!
TC
Surf was up?! Well, we spent good time this weekend finishing up the firewall... I'm out of body shop HELL!! Brian married the sub to the body and we are going for mock up this week!
TC
Yes Sir, that looks great! I hope mine looks that good!!!
Surf was fun, I always find a day at the beach is much more fun than sweating in the garage! but the downside is no work getting done,
Surf was fun, I always find a day at the beach is much more fun than sweating in the garage! but the downside is no work getting done,
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Gentlemen with 1st gen Fbodys and X body, I have a big post of parts I'm not using any more on the Pro-touring website,
http://www.pro-touring.com/showthrea...arts-and-stuff!!!!!
Pic will be up tomorrow,
http://www.pro-touring.com/showthrea...arts-and-stuff!!!!!
Pic will be up tomorrow,
I'm going to have him shorten the rearend, reweld the bearing ends, and then weld on the Alston brackets for the rear kit,
On The Tree
Joined: Oct 2010
Posts: 113
Likes: 0
From: Melbourne, Fla
Steve,
You will NOT go wrong with having Brian and ScreaminPerformance do work for you!
Just look thru my pics and you can see how meticulous his work is!
Yep, hoping to get her fired up in the next week! Stay tuned!
TC
You will NOT go wrong with having Brian and ScreaminPerformance do work for you!
Just look thru my pics and you can see how meticulous his work is! Yep, hoping to get her fired up in the next week! Stay tuned!
TC
Your progress looks good. I have my Nova very close to firing up naturally aspirated, but that will all go on hold for the next week while I go on a hiking trip to CO with my son's Youth Group. I can totally relate with balancing the time and money with the kids - 2 teenagers take a lot of both.
I really like the way your frame uses the Corvette control arms. After daily driving my '99 C5 for the past 113k miles, I can tell you they handle well. Keep on with the pictures. By the way - be careful on your driveshaft measurement. I had to take my brand new 4" dia shaft back to be shortened because I missed the measurement somehow. Oops.
I really like the way your frame uses the Corvette control arms. After daily driving my '99 C5 for the past 113k miles, I can tell you they handle well. Keep on with the pictures. By the way - be careful on your driveshaft measurement. I had to take my brand new 4" dia shaft back to be shortened because I missed the measurement somehow. Oops.
Whats up Steve? Wheres the updates? Just kiddin with ya, I have been in the garage for the past week and a half every night doing something. I like checking out your progress, it keeps me wanting to move forward. I only have a few more things to do today and if all the stars are aligned and there is no wind maybe just maybe this thing will pop off. Good luck!!! Did you get the rest of your suspension?
ahh, ain't really done much, been working too much but that will end soon, I'm doing little stuff here and there,
the bad part about GM is they make 3 different lower control arms for a C6, been working on which one it is, may order next week,
did buy the wife a D90 Nikon, so now we'll see how good the pics get!!
other than that I don't have lot to post about, wish I had more time,
the bad part about GM is they make 3 different lower control arms for a C6, been working on which one it is, may order next week,
did buy the wife a D90 Nikon, so now we'll see how good the pics get!!
other than that I don't have lot to post about, wish I had more time,
The very last shuttle launch has gone off, work is coming to a end for me,
I did find the difference in the control arms, Corvette forums are great, just had to dig for the answer!!!
So, monday I will be ordering the otherside, and today I might be installing the sub on the nose of the car, we'll see,
I did find the difference in the control arms, Corvette forums are great, just had to dig for the answer!!!
So, monday I will be ordering the otherside, and today I might be installing the sub on the nose of the car, we'll see,
The very last shuttle launch has gone off, work is coming to a end for me,
I did find the difference in the control arms, Corvette forums are great, just had to dig for the answer!!!
So, monday I will be ordering the otherside, and today I might be installing the sub on the nose of the car, we'll see,
I did find the difference in the control arms, Corvette forums are great, just had to dig for the answer!!!
So, monday I will be ordering the otherside, and today I might be installing the sub on the nose of the car, we'll see,