Steve68's Camaro.
FINALLY pics!!!! the first pics are the C6 componets I found used, have to buy the reat from GM or a supplier,
The next is a couple views of the sub resting in the grass, the splinned sway bar is in the mount,
The next is a couple views of the sub resting in the grass, the splinned sway bar is in the mount,
And then the new toy, got a deal on this at the MAC show in Vegas, my tool guy really went to bat for me!!
As you can all see it's turned into the catch all!!!
Question, comments, concerns, assembly time!!! working on getting the new C6 suspension parts!
As you can all see it's turned into the catch all!!!
Question, comments, concerns, assembly time!!! working on getting the new C6 suspension parts!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
All I can say is WOW!!! I bet you are smiling. I have to agree with you on the "finally pics"!!! I have checked your thread 10,000 times to see the goodies. It was worth the wait for sure. Now comes the fun part and turning parts into a car. It seems I am always happy to get the parts but then its, **** I dont have time to install the goodies. Did you find out the gen of the sub? 1 or 2?
Whats that mean???
He was building the Red Witch as I was figuring out that my Camaro should be like my E30 325IS BMW's!!! Our thinking was on the same level, but not our engineering or wallets!
He was building the Red Witch as I was figuring out that my Camaro should be like my E30 325IS BMW's!!! Our thinking was on the same level, but not our engineering or wallets!
Last edited by Steve68; Jun 1, 2011 at 11:36 AM.
All I can say is WOW!!! I bet you are smiling. I have to agree with you on the "finally pics"!!! I have checked your thread 10,000 times to see the goodies. It was worth the wait for sure. Now comes the fun part and turning parts into a car. It seems I am always happy to get the parts but then its, **** I dont have time to install the goodies. Did you find out the gen of the sub? 1 or 2?
I was reading up on this, the difference in subs, but I had to catch some ZZZ's for this early AM's landing!!!
so, I had a 2 hour nap since going to sleep Monday night!!!
It looks like this is a 1st gen sub with adjustable shock mounts, the complete one in the pic on the previous page,
Last edited by Steve68; Jun 1, 2011 at 11:38 AM.
I dont think the car will have hero status like the Steilow cars and all the other big money rides, there seems to be a "cliquish" type of thing going on with certain drivers and cars, and if you can't show up and run with the best, in time and hp, your ride wont get any love from other builders and the masses.
Steilow can drive also, the GM commercials where there driving the CTSV and vette on the ring in Germany, I'm pretty sure is him driving,
Steilow can drive also, the GM commercials where there driving the CTSV and vette on the ring in Germany, I'm pretty sure is him driving,
I was wondering if someone would catch that, those are off my DD 98 Altima with Nissan Spec V wheels, I have the rear wheels loose on the car without the drums, they need to turned, so there not really for the new sub!!!
But I did get the bolt list yesterday!
But I did get the bolt list yesterday!
I was comparing the two subs you posted pics of and it seems as if yours is different at the lower control arm mount. There is some sort of curved piece that is on the outside of the lower control arm bushings. Yours only has two where as the other one has them on the front and the back. Was that intentionally done?