power steering pulley underdrive
Thread Starter
Teching In
Joined: Oct 2005
Posts: 33
Likes: 0
power steering pulley underdrive I need a smaller power steering pump pulley. I am putting Corvette LS1 into '67 vette with VB&P aftermarket front a arms and the stock 6" pulley does not clear the upper driver side a arm. Is there a 4 1/2" pulley available and where could I get one? Any other solutions other than modifying a arm cross bar and bolts? Thanks, John
I picked a pulley out from autozone and pressed it on (even though they had no replacement pulley available as far as computer was concerned).. I just asked them to grab a couple and I picked one (it has 3 slots in it so I can take the bolts out easier, too. 
just an idea. good luck
olly
just an idea. good luck
olly
