need4speed2

I recently converted my 95Z to LS1 engine and had www.LT1350.com F up my harness and will not honor it.

Anyway k now where I can find a full 95 LT1 and 01 LS1 harness schematic?

Mean Green z28

iTrader: (17)

sorry to hear that bro, totally ruins the whole project. The best you could do is subscribe to alldatadiy.com for the '01 harness and shoebox's site for the 95. there's also a lot of info here on converting the harnesses.

1bdbrd

iTrader: (12)

im wondering, is there much difference between a 94 and 95 lt1 harness? i wouldnt think so as all the parts are interchangeable...

G-Body

iTrader: (4)

Link please.

You can find many if not all of the 99-02 f-body diagrams here http://www.ls7power.com/diagrams/

Let me know if you need any help with what hooks to what.

GEARHED

iTrader: (5)

Little difference between 93 & 94 but after that there are quite a few differences that make it almost impossible to swap a 94' into a 95' without splicing pigtails on at various points for the tranny, distributor and fans.

1bdbrd

iTrader: (12)

so i take it that i cant use a 95 wiring diagram to help me convert my wiring harness? if not, where can i find a harness diagram for the 94 LT1 cars so i can convert my ls1 harness?

need4speed2

Thank you for the links. I am going to try and figure this out. speed scene wants $1350 for a harness

acdcgcsc

hey give superior harness company a call 501 982 1050 they can give you a better deal on a harness to convert or they may have a diagram.

F8LWS6

iTrader: (11)

Awesome thanks for that link! That should help out alot.

The other link referred to is this :

http://shbox.com/1/4th_gen_tech1.html

G-Body

iTrader: (4)

I just noticed yesterday that they do not have the schematics for the underhood fusebox at LS7Power . But other than that it looks pretty complete.

F8LWS6

iTrader: (11)

Yeah i'm going to scan through it all better tomorrow when i'm out looking at all the stuff. I'm going to try and wire it up while I wait on motor parts. It will be a while before i'm ready to put the motor in though so I won't know how it turned out till then unfortunatly.

If I get stuck i'll just register up for alldatadiy and go from there.

yamaryder6

hey sorry to butt in but where did you find your schematics for the 95 lt1 i need one for the vette thanks to anyone who can help