PINKS ls1 s13
#23
Banned
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Ok, let me catch up.
We have already run the car for Pinks. We won! I'm just putting this on here piece by piece cause I hate sittin in front of computers so long. Plus you gotta love the suspence.
No we are not buying any mountin stuff for the ls1.
The ls1 had a ported throttle body, Nos, and headers.
Pewter, hook em up with the first cams specs if you got em.
We have already run the car for Pinks. We won! I'm just putting this on here piece by piece cause I hate sittin in front of computers so long. Plus you gotta love the suspence.
No we are not buying any mountin stuff for the ls1.
The ls1 had a ported throttle body, Nos, and headers.
Pewter, hook em up with the first cams specs if you got em.
#24
Banned
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Oh, and orange nova in backround can be seen here.
http://www.pittspeed.com/forums/show...light=bad+nova
Its got a lot of pics so check it out.
http://www.pittspeed.com/forums/show...light=bad+nova
Its got a lot of pics so check it out.
#25
Banned
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Ok, where was I......
Oh, I guess it needs a rear end. 8.8 ford live axle. Tubes TIG welded to center section with nickle, custom narrowed, pinoin centered in vehicle. Strange 31 spline axles, spool, and 4.10's. Coil overs, and Hand made ladder bars.
Oh, I guess it needs a rear end. 8.8 ford live axle. Tubes TIG welded to center section with nickle, custom narrowed, pinoin centered in vehicle. Strange 31 spline axles, spool, and 4.10's. Coil overs, and Hand made ladder bars.
#30
TECH Enthusiast
iTrader: (22)
Join Date: Dec 2002
Location: mt.pleasant pa 15666
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ZZ4Blazer
I think on the Pittspeed site his name is Bravada442. Either way, his name is Sean. He was just telling me bout your TB and the 408 your putting in there. Figured it had to be you because of your sig. He said your a wiz with the III gen stuff.
Im pretty sure he got my stepside tailgate for my s-10 from you. Was white, from a heat & air conditioning company.
Car looks just sick. Can't wait to see the rest of the pics. You guys ever think bout bringing the car back, and having a go at it again for another show?
Im pretty sure he got my stepside tailgate for my s-10 from you. Was white, from a heat & air conditioning company.
Car looks just sick. Can't wait to see the rest of the pics. You guys ever think bout bringing the car back, and having a go at it again for another show?
#35
Banned
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by thinkBIG
You guys everheard of a school called RCS in that area? Its a machining school.
Real crooked service? Yup I know those guys. Havent heard anything about their teaching, but I know a little about their service work.
#36
Banned
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
If you look really closely you can see the mounts we made for the engine. They are simply 2x1/4 strap steel welded to the cross member, and boxed in.
Oh, and I think its ready for a fresh coat of paint.
yup. primer
gotta love strange axles, and ladder bars!
And, the final product.....................................
Representing the Burgh baby!
Oh, and I think its ready for a fresh coat of paint.
yup. primer
gotta love strange axles, and ladder bars!
And, the final product.....................................
Representing the Burgh baby!
#38
Staging Lane
Join Date: Dec 2005
Location: New Jersey
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by domination
Real crooked service? Yup I know those guys. Havent heard anything about their teaching, but I know a little about their service work.
#39
Banned
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Alright, time for the gravy!
Those tires look a little better huh?
Rear assembly
Full legnth frame tube, coming from cross member, to the front clip. And the tranny mount. Its a bit crooked, but the tranny is held in straight. You'll have that with 24 hour work shifts.
The moment you've all been waiting for..................
What oil pan did you use to clear that cross member????
Oh, we just cut the factory pan rail off and welded up a cutom joint! enjoy. The front kick out hold 8.5 courts. Its baffled, and has a transfer tube from the rear shelf to the from sump for drainage during acceleration.
What headers did you use????
Hooker super comps baby. Slight massaging on the passengerside and it bolts right in. The drivers side needed 3 pipes made completely from scratch. Then we had em powder coated.
your moment of zen
and, the first fire.
Those tires look a little better huh?
Rear assembly
Full legnth frame tube, coming from cross member, to the front clip. And the tranny mount. Its a bit crooked, but the tranny is held in straight. You'll have that with 24 hour work shifts.
The moment you've all been waiting for..................
What oil pan did you use to clear that cross member????
Oh, we just cut the factory pan rail off and welded up a cutom joint! enjoy. The front kick out hold 8.5 courts. Its baffled, and has a transfer tube from the rear shelf to the from sump for drainage during acceleration.
What headers did you use????
Hooker super comps baby. Slight massaging on the passengerside and it bolts right in. The drivers side needed 3 pipes made completely from scratch. Then we had em powder coated.
your moment of zen
and, the first fire.