Going to put an LT1 in a 72 camaro but...
#4
This is a drop in swap. S&P style adapters bolt to your block and stock V-8 motor mounts bolt to them. This has been asked and answered numerous times, you will find a lot of info if you search the forum. Lots of other folks make mounts also (TeeToe Jones is one of them).
#5
Originally Posted by kwkenuf
This is a drop in swap. S&P style adapters bolt to your block and stock V-8 motor mounts bolt to them. This has been asked and answered numerous times, you will find a lot of info if you search the forum. Lots of other folks make mounts also (TeeToe Jones is one of them).
#6
There is alot of good information on www.nastyz28.com for us second gen guys....
I went with motor mounts from www.brphotrods.com as I intend to keep the A/C in my Z and the BRP motor mounts will allow me to re-use the LS1 compressor and no modifications to the oil pan are nedded.
I went with motor mounts from www.brphotrods.com as I intend to keep the A/C in my Z and the BRP motor mounts will allow me to re-use the LS1 compressor and no modifications to the oil pan are nedded.