Crank trigger sensor and cam position sensor
Crank trigger sensor and cam position sensor Can either of these be bad and still allow the engine to run? My dad is kicking my *** about my tach STILL not working and the initiative is he's gonna pay for my 3:73s.
I have check the pin 10(white wire) and its in the correct place. Tried 2 ECM's and 3 tachs and still nothing.
The tach needle doesn't even jump or do anything. Tach signal is set to 4.
I read while searching that there is a seperate ground wire for the tach signal wire??? I havn't checked that out yet.
If worse comes to worse I'll drive up and get a shop to plug in and see if it shows a tach signal.
Thanks gang!!!
-Matt
I have check the pin 10(white wire) and its in the correct place. Tried 2 ECM's and 3 tachs and still nothing.
The tach needle doesn't even jump or do anything. Tach signal is set to 4.
I read while searching that there is a seperate ground wire for the tach signal wire??? I havn't checked that out yet.
If worse comes to worse I'll drive up and get a shop to plug in and see if it shows a tach signal.
Thanks gang!!!
-Matt
