ROBSQUEZN

Anyone know if an 02 truck 4l60e /ls1 will work in a 65 chevelle swap with out probloms.. tranny is a 2002 truck 4l60e #610cjdy26506178 using stock
ecu & a painless wiring kit .. thanks for the help rob (916)743-2606

robsquezn@sbcglobal.net E-MAIL or call me please.............................

super_kev

iTrader: (5)

Those old cars have so much room in the engine bay you shouldn't have any problems. You can get motor/crossmember mounts from BRP and others (S&P, Year One, etc.). Here's a thread over at pro-touring.com to get you started.

ROBSQUEZN

will the electronics part off the tranny work right.. or do i need somthin to do that

thanks for any info

philntx

iTrader: (8)

Need to talk to Painless to make sure the harness is for an automatic and a 4L60E (not a 4L80E).

You'll need to adapt for the speedometer, since the Chevelle is cable driven, but the parts are readily available.

ROBSQUEZN

we are going to be runing dakota digital dash do u know if thay will plug & play...

philntx

iTrader: (8)

Same thing. Talk to Dakota and tell them what you have. They'll either say it will work or will tell you what you need to do to make it work.

Sorry,