no dice..

I know our IT dept has been on the warpath lately, must be blocking it.. Hopefully they don't block Tech all together

 

nah my house doesnt get any pics right now either.. and ive seen every pic since this thread was started.. somethings messed up???

 

I wonder if its comcast. I'm having problems at work also. If I copy the link and paste it, it opens fine. Go back to the orginal page and everything loads fine.
Phil

 

works now?

 

I'm working on a new server right now

 

how come the pic's are not coming up phil?

 

okay fair enough- any more news,progress pic's-hanging to see the finish product

 

It took me about an hour but I got all the pics transfered over to a new server. This thread has all the updated links.
Check over @ https://ls1tech.com/forums/showthrea...=774191&page=9

 

One thing I need to decide is where to mount the ignition coils. I'm trying to keep the engine bay as clean as possible so I need to put them either in the cabin or fender well.


Oh I feel sick. I just got off the phone ordering the final parts. Spent another 500 on fuel feed & Return, Turbo feed/Return, and the misc hoses to finish up the build. Also got a trans cooler and some battery terminals for charging. I'm done with ordering and its time to get this baby done.

 

These things can add up but think of it this way. this thing is gonna be SWeeet!

 

Ok, all of the links should be updated now, if you see any pics that don't show up let me know.
Phil

 

Lurking......

 

Got one corner of the sheetmetal work started...

 

been reading threw from the beginning, looking forward to seeing this thing run

 

Updates?

 

thats an awesome build

 

come on phil!

 

Not much for updates. I got most of the welding done and tore the setup down to send out for coating. The engine is out and did a couple small things. Main thing that needs to be done is clearance for the wheel 2 wheel fitting that goes into the block for the accusump. The oil pan and block are clearanced, I'll drop the pan off tomorrow to get milled. Its coming slowly but surely.

 

since you are going the turbo route. you do not have to have or even need headers. stock manifolds work fine.

 

His headers are already built and they are PURDY!