Bigdog's Wagon
Thread Starter
Teching In
Joined: May 2006
Posts: 18
Likes: 0
From: Mesa,Az
Had to cut and box-in the front cross member, cut down the trans dap mounts because they ran into the ac pump and make spacers to lift the engine up a little. Weld a longer bracket forward on the tranny cross bar. I also want to thank all you guy's, Spalding Auto in Washington and John at Spear Tech.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
Teching In
Joined: May 2006
Posts: 18
Likes: 0
From: Mesa,Az
Cool air Yes one of my plans is to extend the tube over to the right side and out to the front. The bigamus boat has a 2.77 I've been having fun embear assing some suv's and rice burners. You have to know when to hold them and fold them.
Thread Starter
Teching In
Joined: May 2006
Posts: 18
Likes: 0
From: Mesa,Az
AC ran into the cross member. Had to spacer the engine up about and 1.125. Truck oil pan had about a .5 clearance when done. Had to cut flanges off of the exhaust manifolds and turn them to clear the side frame rails.
Originally Posted by Mesa
Well five months later and one caprice classic wagon and one 2003 5.3 vortec. It's finally done and I just love it. What a sleeper.
Nice work.
Take that thing down to firebird and post some timeslips.