newbie...with a ls1....but not in your typical car
#1102
finally uploaded some pics and a short video clip of my LS1 kit car
http://s398.photobucket.com/albums/p.../GDT70%20Lola/
these are some of the build pics, i only put a few up to save boring people to death.
http://s398.photobucket.com/albums/p...t=MOV01277.flv
the second link should be a short video clip of a 2nd gear launch (1st is no use), its geared for 63mph in second and 95mph in 3rd when the clip about ends! :-)
http://s398.photobucket.com/albums/p.../GDT70%20Lola/
these are some of the build pics, i only put a few up to save boring people to death.
http://s398.photobucket.com/albums/p...t=MOV01277.flv
the second link should be a short video clip of a 2nd gear launch (1st is no use), its geared for 63mph in second and 95mph in 3rd when the clip about ends! :-)
#1103
TECH Senior Member
iTrader: (2)
finally uploaded some pics and a short video clip of my LS1 kit car
http://s398.photobucket.com/albums/p.../GDT70%20Lola/
these are some of the build pics, i only put a few up to save boring people to death.
http://s398.photobucket.com/albums/p...t=MOV01277.flv
the second link should be a short video clip of a 2nd gear launch (1st is no use), its geared for 63mph in second and 95mph in 3rd when the clip about ends! :-)
http://s398.photobucket.com/albums/p.../GDT70%20Lola/
these are some of the build pics, i only put a few up to save boring people to death.
http://s398.photobucket.com/albums/p...t=MOV01277.flv
the second link should be a short video clip of a 2nd gear launch (1st is no use), its geared for 63mph in second and 95mph in 3rd when the clip about ends! :-)
I'm building something similar, bit a bit roomier. A mid-engine Trans Am, if I can get it all figured out.
Where are more details on your car? I'm particularly interested in the cost of the G50/adapter/clutch setup. I was thinking about the same parts for my car.
Last edited by JasonWW; 12-17-2008 at 08:25 AM.
#1105
Now that's a fine looking car. I wouldn't even have to drive it. I could just put it in the living room and stare at it all day.
I'm building something similar, bit a bit roomier. A mid-engine Trans Am, if I can get it all figured out.
Where are more details on your car? I'm particularly interested in the cost of the G50/adapter/clutch setup. I was thinking about the same parts for my car.
I'm building something similar, bit a bit roomier. A mid-engine Trans Am, if I can get it all figured out.
Where are more details on your car? I'm particularly interested in the cost of the G50/adapter/clutch setup. I was thinking about the same parts for my car.
http://www.gdcars.com/
their mainstream action was replica Cobras, but the T70 lola replica is better looking in my opinion. they make up their own adaptor plate from billet alloy to hook up any G50 box to the Ls series which works a treat. i think they also do plates for other boxes as well.
my G50 box is a 5 speed manual and has been converted to a hydraulic clutch and release bearing. the clutch is a 7 1/2" clutchmaster triple plate race item. we run the box upside down so the breather was plugged and a new adaptor breather made for the (new) top side. its done like that to get the driveshafts into line with the hubs and chassis and works really well.
#1106
How much have you spent on this project? If you're still under $2009, check out grassrootsmotorsports.com they do a challenge every year, involving a drag race, autocross, and car show. this might be a good candidate for the challenge if you can account for your budget.
#1112
updates
here are some updates guys
some are in hd
http://www.youtube.com/watch?v=DzcSX6kLexw&fmt=22
http://www.youtube.com/watch?v=Yn1bP5Cuy5I&fmt=22
http://www.youtube.com/watch?v=iEOTkIQlQac&fmt=22
http://www.youtube.com/watch?v=vCHGc5_IUZU&fmt=22
SOME PRODUCED VIDEOS I MADE
http://www.youtube.com/watch?v=q56aNZ4oMA4&FMT=22
http://www.youtube.com/watch?v=RAo1DYCbxIk&FMT=22
http://www.youtube.com/watch?v=Qw5O7UrUNzs&FMT=22
http://www.youtube.com/watch?v=pyvYgeTAdpA&FMT=22
http://www.youtube.com/watch?v=Ckb9f_A3QoM&FMT=22
http://www.youtube.com/watch?v=G5XW_ZKlq_c&FMT=22
http://www.youtube.com/watch?v=MX6C3CtxaFs&FMT=22
http://www.youtube.com/watch?v=bsCaOg1JOv4&fmt=22
AND CHECK OUT THIS VIDEO I MADE MAKING FUN OF MY BUDDY CHRIS FOR ALWAYS SITTING AT THE LINE SO LONG......
http://www.youtube.com/watch?v=mxUK7Xl874M&FMT=22
some are in hd
http://www.youtube.com/watch?v=DzcSX6kLexw&fmt=22
http://www.youtube.com/watch?v=Yn1bP5Cuy5I&fmt=22
http://www.youtube.com/watch?v=iEOTkIQlQac&fmt=22
http://www.youtube.com/watch?v=vCHGc5_IUZU&fmt=22
SOME PRODUCED VIDEOS I MADE
http://www.youtube.com/watch?v=q56aNZ4oMA4&FMT=22
http://www.youtube.com/watch?v=RAo1DYCbxIk&FMT=22
http://www.youtube.com/watch?v=Qw5O7UrUNzs&FMT=22
http://www.youtube.com/watch?v=pyvYgeTAdpA&FMT=22
http://www.youtube.com/watch?v=Ckb9f_A3QoM&FMT=22
http://www.youtube.com/watch?v=G5XW_ZKlq_c&FMT=22
http://www.youtube.com/watch?v=MX6C3CtxaFs&FMT=22
http://www.youtube.com/watch?v=bsCaOg1JOv4&fmt=22
AND CHECK OUT THIS VIDEO I MADE MAKING FUN OF MY BUDDY CHRIS FOR ALWAYS SITTING AT THE LINE SO LONG......
http://www.youtube.com/watch?v=mxUK7Xl874M&FMT=22
#1115
12 Second Club
iTrader: (2)
Well, I just sat here today and read the entire thread all at once, including some of the Honda-Tech(Im also a member on there) and Paki threads. I would like to say that this is probably th most extreme "crossover" that I have ever heard of and Im glad to see that you made it work. You did a great job and hopefully that you have fun on your next project.
#1117
Staging Lane
Join Date: Apr 2008
Location: Shawnee, KS
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
AND CHECK OUT THIS VIDEO I MADE MAKING FUN OF MY BUDDY CHRIS FOR ALWAYS SITTING AT THE LINE SO LONG......
http://www.youtube.com/watch?v=mxUK7Xl874M&FMT=22
http://www.youtube.com/watch?v=mxUK7Xl874M&FMT=22
Kick *** build. I need to go back and read the 50 other pages of the build. Want to trade for a Pinto?
Scott
#1119
Bad *** bro!! I definitely respect and also dont envy the amount of work it took to do that. Im in the process of helping my pops change out the Olds 215/th350 in his MGB GT over to an LQ9/4l60e and its mucho work when your dealing with such tight quarters. Your car doesnt look hacked and thats priority one snce you coulda pulled the swap off and it look like dog ****. Be proud of yourself for a job well done, Im impressed and Ive seen some weird combos. Besides the ls1 mini cooper this has got to top the list of "Most Ambitious Swaps Ever". Since youve gone this far maybe an STS style turbo setup would work to put it even more over the top.