For a gm a-body, is that all that is needed is the brp mounts? Does this eliminate all intereference to the oil pan regardless of which LS is used?

Thanks-JOhn

 

Spring is here, (I know this by the fresh 8" of snow here in Minnesota) and I've kicked this project into high gear. I've started dumping some pics at photobucket. I've tried to label my pics as to help others doing this A body swap.

http://s285.photobucket.com/albums/l...Cutlass%20LS1/

Let me know what you think!


Eric

 

Eric nice ride, I'm currently building a 1965 f-85 with ls1 4l60. Good luck and don't scratch that paint it's to nice as is!

 

I ended up buying Hooker Swap headders for my LS1. I just noticed that the stock plug wire ends with the metal shields don't seem to fit between the headder tubes. Is there a good solution to this problem?

Eric

 

I used Taylor wires. I had to build one custom wire to route it away from the headers. Other than that one they work great, though they are a little spendy for no more wire than you get.

Pat

 

more info about this swap......