9.96 at 139.5 on the LS1 Stang!!
9.96 at 139.5 on the LS1 Stang!! Tonight was the night , it took me 4 passes to get it right , I tried a harlan 2 step with the NOS and it proved to me to much of a shot on the wood. A 200 shot wont dead hook , Imagine that !!!
Anyway with a 4k launch and getting the car in the groove got me the time.
This was on slick that are about junk and humidity like crazy . I feel it has a 9.80 in it but I was quickly told to slow it down since I dont have my 9 sec license and the car does not have a certified roll cage for these times.
It is now for sale. First 13k takes it , FIRM on price.
Anyway with a 4k launch and getting the car in the groove got me the time.
This was on slick that are about junk and humidity like crazy . I feel it has a 9.80 in it but I was quickly told to slow it down since I dont have my 9 sec license and the car does not have a certified roll cage for these times.
It is now for sale. First 13k takes it , FIRM on price.
Originally Posted by PRAY HRD
congrats! just wondering if you happened to weight it this time?
I got video , 4 of them . 3 were in the 10.20's all over the track and 1 -9.96 video .
I did weigh the car this time also, 3180 with me in it.
the video is 13 seconds long so i'm not sure that counts for a 9.96 pass. 
j/k. nice job rowing there.
that's a nice setup for $13K! the car probably has sooo much more in it than that with better air and an auto, and a good hook on the 200 shot!
as for weight, i'm surprised it's that much, though i don't know what you weight of course. that car should be able to get down to at least a 2900 lb race weight including a moly 10-12pt if someone takes the time. i bet that car could turn 9.5's???
good luck on the sale!
j/k. nice job rowing there.that's a nice setup for $13K! the car probably has sooo much more in it than that with better air and an auto, and a good hook on the 200 shot!
as for weight, i'm surprised it's that much, though i don't know what you weight of course. that car should be able to get down to at least a 2900 lb race weight including a moly 10-12pt if someone takes the time. i bet that car could turn 9.5's???
good luck on the sale!
Trending Topics
I weigh in at 194 ... I figure new slicks(these are very old) and 3.73 gears it will run a 9.7 or so . I will keep you all updated . I plan to pursue the limits of this set up . The 4.10's hit the tires way to hard and I cross the stripe in 4th just hitting the rev limiter at about 7k
I am going to start to aqquire my license since my Turbo Z is about done and will need it for that anyway .
I need to update the cage also to a 10 point and get it certified.
I am going to start to aqquire my license since my Turbo Z is about done and will need it for that anyway .
I need to update the cage also to a 10 point and get it certified.
i thought you wanted to cross the stripe in 4th at about the rev limit, unless that's above your powerband. i don't know what cam you've got in it or where the motor makes power and i'm sure you do. i'm sure i'll have problems too when i take it to the track with 4.56's and 27" DR's through a stick. i'm considering eventually going auto som i'm not gonna change the gears yet til i know what i'm ultimately going to do with the car.
can't wait to see how far you can go with it!
can't wait to see how far you can go with it!
